Audited rotation across all four players after reports it misbehaves.
Android native rootView.rotation + layout swap — the ExoPlayer surface is
inside the rotated view, so video turns with it.
Tizen CSS for graphics AND AVPlay hardware-plane rotation for video. The
code says why: a CSS-rotated <video> "blacks out" on Tizen.
Web CSS transform. Correct — a browser composites video in the DOM.
BrightSign CSS transform only, inherited from the web player. BROKEN: with hwz
enabled the video decodes onto a hardware plane the DOM cannot
transform, so the images and widgets rotate and the video does not.
A portrait panel plays sideways video.
BrightSign is the platform that does not rotate correctly, and Tizen had already
found the same wall from the other side — any platform compositing video below
the DOM needs rotation done at the output.
roVideoMode takes a transform (normal/90/180/270) and rotating the screen rotates
EVERY layer, because it happens below the compositor rather than above it. The
player now asks the host first and, when the host succeeds, clears its own CSS
transform — otherwise the graphics rotate twice while the video rotates once.
The host reports success rather than assuming it: if it cannot rotate, the CSS
path stands, which turns most of the content instead of none of it, and the
promise resolves false rather than never settling. A portrait panel showing
landscape content with no clue why is the outcome worth avoiding.
1066 pass. The BrightScript needs hardware to verify; the decision path does not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Two things reviewed against the hardware.
REMOTE CAPTURE. An in-page canvas cannot read the hardware plane, so a
screenshot from a BrightSign is a composite with the video missing. The player
now asks the HOST, which uses the unit's own Diagnostic Web Server to capture the
real framebuffer, video included.
It has to run in BrightScript rather than the page for two reasons: the DWS is
http on localhost while the player is served over https, so the page would be
blocked as mixed content; and BrightScript is subject to neither CORS nor
mixed-content rules. Credentials are the documented default — user "admin",
password = the unit serial — which the host reads directly.
It requires PRIMARY STORAGE: the endpoint writes the full-size capture to disk
before returning a thumbnail, so a unit with no card or SSD answers "No primary
storage found." That message is passed through verbatim rather than swallowed,
and the canvas path still runs as a fallback, so a player with no disk keeps
producing the partial screenshot it can rather than nothing at all. Verified
against the real unit: the endpoint is reachable and blocked solely on storage.
THE STUCK TESTER. An opted-in player on 1.9.29-rc1 was told "holding prerelease
of the same core" when offered rc3 — so it would never move forward through
rc1 -> rc2 -> rc3, which is the opposite of what opting in is for, and would have
stopped our own XT245 ever receiving the next candidate.
The hold rule exists to stop a test build being dragged BACK to its release. It
now applies only when the advertised version IS that release: a newer prerelease
of the same core is offered normally, the release still cannot claw a tester
back, a newer core still lands, and a player that never opted in is still refused
a prerelease.
Also verified end to end on alpha: the advertised sha256 matches the served bytes
exactly, size matches, and every member of the package is stored.
1063 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The web player sent battery/storage/RAM/CPU as nulls and 'Web Player' in the
wifi_ssid column, and the bs_model / bs_os_version / bs_serial / bs_screen fields
the player already reported at registration were consumed by nothing. A browser
tab genuinely has none of that. A BrightSign has some of it, and was reporting
none.
Telemetry comes from a CACHE the heartbeat reads synchronously. The beat builds
its payload every 15s without awaiting, but the one real sensor here —
deviceInfo.getTemperature() — returns a promise; awaiting inside the beat would
either block it or serialise a pending Promise into the payload, which is exactly
how device_id once became "[object Promise]". The cache starts EMPTY rather than
null-filled and is spread last, so off-platform nothing changes and a null here
can never clobber a value another player family legitimately supplied.
wifi_ssid was actively false on a PoE Ethernet appliance — an operator reading
that column was told an SSID that does not exist. It is null there now, and the
device view shows a real hardware block instead. Android's WiFi display is
untouched.
Hardware identity is a SEPARATE writer from applyDeviceInfo, deliberately. That
function is a blind full-row overwrite, and an empty device_info once nulled
seventeen columns every five minutes because {} is truthy. These fields arrive
only on a full register, so the same shape would wipe them on every lightweight
refresh in between; COALESCE makes "no news" mean "unchanged".
The OS build gets its own column rather than reusing android_version, which is
load-bearing as a TYPE discriminator: device-detail chooses between the Android
and browser layouts with android_version.startsWith('Web/'), so writing
"BrightSign OS 9.0.189" there would have rendered a BrightSign with battery and
WiFi cards — and applyDeviceInfo would have clobbered it on the next refresh.
Storage is labelled "Player Storage", not "Storage": on this family the number is
the widget's cache quota, not the device filesystem, and it lands in the same
column as Android's real disk figures.
Schema: device_telemetry.temperature_c REAL; devices.hardware_model,
hardware_serial, hardware_os_version, output_index. All nullable, all idempotent
in the existing migration array.
973 pass (+19). The temperature tests drive a real socket into a real server,
because changing the arity of the telemetry INSERT would break every player's
heartbeat, not just BrightSign's.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The web player handles four of the ~20 fleet commands, because a browser tab
genuinely cannot do more. A BrightSign can, and was inheriting the browser's
limits for no reason.
screen_on/screen_off now send CEC Image View On (0x0D) / Standby (0x36) so the
display actually sleeps. The overlay only painted the screen black: the panel
stayed lit, drawing power and at risk of burn-in. Best effort by design — some
displays ignore broadcast CEC and need direct addressing — so displayPower()
returns false when unavailable and the overlay is applied either way, meaning
something visible always happens.
reboot was silently ignored: the dashboard button did nothing on a web player.
It now goes through the host to RebootSystem, and still logs a clear "not
supported" off-platform rather than failing quietly.
set_volume applies to whatever is playing AND is re-applied on every subsequent
'play' event, caught in the capture phase because media events do not bubble.
Media elements are created per item across fullscreen, zone and preload paths,
so setting volume once would otherwise last only until the playlist advanced.
Wall followers stay silent throughout — that is deliberate, not an oversight.
A dual-output player addresses HDMI-N for the screen it actually paints, so
output 2 sleeps its own display rather than output 1's.
954 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The bridge stored device_id in the registry and the display still came back as a
NEW device on the next boot. The id is not an identity on its own: the server
authenticates a claim to an existing display with the token, so an id presented
without one reads as a brand-new player and gets a fresh row.
device_token now sits alongside device_id in the registry, getConfig adopts both,
and clearIdentity forgets both — a stale token must not outlive the identity it
belongs to.
Found on an XT245, not in a test, which is why the three new cases name the
symptom rather than the mechanism. 951 pass.
Also worth recording from the same session: the duplicate rows had a second
cause. The widget's storage_path was pointing nowhere useful, so localStorage
had no persistent home and the per-install fingerprint salt was regenerated on
every boot. With storage_path set correctly the cache directory now exists on
the player and the fingerprint is stable, which is what stopped the churn; the
registry identity is the belt to that pair of braces.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Reviewed autorun.brs and st-bridge.js line-by-line against the real examples
instead of the prose docs. Five defects, three of which would have been silent.
The registry API is asynchronous and section-oriented: read(section, key)
returns a Promise and writes take an object, write(section, {k: v}). The bridge
treated both as synchronous, so deviceId() returned a Promise object — truthy
and non-empty — and a panel would have registered as "[object Promise]" while
its real row sat unclaimed. It now prefetches into a cache behind onReady(), and
connect() waits for that before registering.
brightsign_js_objects_enabled: true is required alongside nodejs_enabled for
require("@brightsign/*"). Without it the bridge degrades to no-ops and the
player loses identity and restart delegation — which would have read as
"BrightSign doesn't work" rather than as one missing flag.
storage_path is a directory name, not a volume, and storage_quota is a string;
the local fallback URL needs its volume (file:/SD:/offline.html). Added
security_params and hwz_default to match the examples.
SyncManager does not work unless networking/ptp_domain is "0", which needs a
reboot to apply. Done only when this player is configured for native sync, and
read-before-write so it reboots once rather than on every boot.
Confirmed correct as written: messageport, the roHtmlWidgetEvent loop, and
RebootSystem(). The notes also state a widget URL may be an externally hosted
page with the same JS API access — the favourable answer to the question the
original probe was built to ask.
Bridge tests now model the async section-oriented registry, so a synchronous
stand-in can never hide this class of bug again. 931 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The bridge and the host existed but nothing loaded them. Now the player does.
restartPlayer() replaces every location.reload() call site. On BrightSign a
page-initiated reload does not reliably bring the roHtmlWidget back, so the page
asks the host to rebuild it and only falls back to reload() when no host is
there to take the request. That covers the deploy path, the operator refresh,
the service-worker activation and the manual reset.
Identity now round-trips through the registry, which outlives localStorage on
this platform: getConfig() adopts a registry identity when local storage comes
back empty, instead of re-pairing and spawning a second row for a panel that is
already provisioned. The operator reset clears the registry too — otherwise it
would clear localStorage, get the same identity straight back on the next boot,
and reset nothing.
Registration reports platform 'brightsign' rather than "Chrome 120", which is
what sync-backend.js resolves native-vs-ours from, plus model, OS, serial and
which output this widget paints.
Dual output needed a collision fix: autorun.brs gives the second HDMI output its
own widget, and both widgets share an origin, a registry and one SD
storage_path. Un-namespaced, output 2 would read output 1's config, install salt
and device id and the two would collapse into a single device row. Storage keys
and registry keys are now suffixed per output; screen 1 keeps the bare names so
nothing existing moves.
The bridge is served from its single source so the copy the player loads can
never skew from the one on the SD card next to autorun.brs, and it is served to
every player rather than gated on a user agent — a panel reporting an unexpected
UA would otherwise silently lose restart-instead-of-reload.
Two test harnesses extract player functions and run them in an isolated scope,
so they now supply SCREEN_SUFFIX; one gained a case proving two outputs of one
player get distinct identities. 927 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
