[
  {
    "id": "CRTCollapse",
    "name": "CRT Collapse",
    "blurb": "Frame crushes to a line, then a dot, then the next image blooms back out. Power-cycle drama.",
    "file": "CRTCollapse.glsl",
    "params": [
      {
        "name": "lineHold",
        "default": 0.16,
        "min": 0,
        "max": 0.45
      },
      {
        "name": "flashGain",
        "default": 1.6,
        "min": 0,
        "max": 4
      },
      {
        "name": "bloom",
        "default": 14,
        "min": 4,
        "max": 40
      }
    ]
  },
  {
    "id": "Datamosh",
    "name": "Datamosh",
    "blurb": "P-frame corruption — the old frame’s gradients smear the new one until the blocks give up.",
    "file": "Datamosh.glsl",
    "params": [
      {
        "name": "blockSize",
        "default": 30,
        "min": 6,
        "max": 90
      },
      {
        "name": "bleed",
        "default": 0.45,
        "min": 0,
        "max": 1.5
      },
      {
        "name": "chroma",
        "default": 0.5,
        "min": 0,
        "max": 2
      }
    ]
  },
  {
    "id": "Etch",
    "name": "Etch",
    "blurb": "Photomask reveal — the frame develops in on a stepper field, with a hot exposure edge.",
    "file": "Etch.glsl",
    "params": [
      {
        "name": "cellSize",
        "default": 26,
        "min": 6,
        "max": 90
      },
      {
        "name": "edgeGlow",
        "default": 1,
        "min": 0,
        "max": 3
      },
      {
        "name": "randomness",
        "default": 0.55,
        "min": 0,
        "max": 1
      },
      {
        "name": "softness",
        "default": 0.09,
        "min": 0.005,
        "max": 0.3
      }
    ]
  },
  {
    "id": "FiberSplice",
    "name": "Fiber Splice",
    "blurb": "Two ends draw apart, the arc fires, and the new frame fuses in from the seam.",
    "file": "FiberSplice.glsl",
    "params": [
      {
        "name": "separation",
        "default": 0.3,
        "min": 0,
        "max": 0.5
      },
      {
        "name": "arcGain",
        "default": 1.8,
        "min": 0,
        "max": 4
      },
      {
        "name": "arcTight",
        "default": 26,
        "min": 4,
        "max": 80
      },
      {
        "name": "flicker",
        "default": 0.5,
        "min": 0,
        "max": 1
      }
    ]
  },
  {
    "id": "FilmAdvance",
    "name": "Film Advance",
    "blurb": "The strip pulls through the gate — frame bar and sprockets sweep past, shutter flickers, next frame registers with a bounce.",
    "file": "FilmAdvance.glsl",
    "params": [
      {
        "name": "frameBar",
        "default": 0.11,
        "min": 0.02,
        "max": 0.35
      },
      {
        "name": "bounce",
        "default": 0.5,
        "min": 0,
        "max": 1.5
      },
      {
        "name": "shutter",
        "default": 0.55,
        "min": 0,
        "max": 1
      },
      {
        "name": "sprockets",
        "default": 1,
        "min": 0,
        "max": 1
      },
      {
        "name": "grainAmt",
        "default": 0.5,
        "min": 0,
        "max": 1
      }
    ]
  },
  {
    "id": "PacketLoss",
    "name": "Packet Loss",
    "blurb": "Blocks drop out of the stream, rows tear, and the new frame retransmits block by block.",
    "file": "PacketLoss.glsl",
    "params": [
      {
        "name": "cols",
        "default": 26,
        "min": 4,
        "max": 80
      },
      {
        "name": "rows",
        "default": 15,
        "min": 3,
        "max": 48
      },
      {
        "name": "rowTear",
        "default": 0.06,
        "min": 0,
        "max": 0.3
      },
      {
        "name": "garbage",
        "default": 0.5,
        "min": 0,
        "max": 1
      }
    ]
  },
  {
    "id": "PixelSort",
    "name": "Pixel Sort",
    "blurb": "Columns tear and quantize like glitch art, then resolve on a staggered per-column threshold.",
    "file": "PixelSort.glsl",
    "params": [
      {
        "name": "columns",
        "default": 200,
        "min": 20,
        "max": 600
      },
      {
        "name": "strength",
        "default": 0.45,
        "min": 0,
        "max": 1
      },
      {
        "name": "split",
        "default": 0.012,
        "min": 0,
        "max": 0.06
      },
      {
        "name": "density",
        "default": 0.35,
        "min": 0,
        "max": 0.9
      }
    ]
  },
  {
    "id": "QuantumDither",
    "name": "Quantum Dither",
    "blurb": "Pixels stay undecided, shimmering between both frames, then collapse on an ordered threshold.",
    "file": "QuantumDither.glsl",
    "params": [
      {
        "name": "grain",
        "default": 180,
        "min": 20,
        "max": 600
      },
      {
        "name": "coherence",
        "default": 0.6,
        "min": 0,
        "max": 1
      },
      {
        "name": "shimmer",
        "default": 0.5,
        "min": 0,
        "max": 1
      },
      {
        "name": "edgeSoft",
        "default": 0.1,
        "min": 0.01,
        "max": 0.4
      }
    ]
  },
  {
    "id": "ReelChange",
    "name": "Reel Change",
    "blurb": "Cue mark burns in the corner, the splice jumps the frame, dust settles on the new reel.",
    "file": "ReelChange.glsl",
    "params": [
      {
        "name": "cueSize",
        "default": 0.045,
        "min": 0,
        "max": 0.12
      },
      {
        "name": "jumpAmt",
        "default": 0.16,
        "min": 0,
        "max": 0.5
      },
      {
        "name": "dust",
        "default": 0.6,
        "min": 0,
        "max": 1
      },
      {
        "name": "scratch",
        "default": 0.5,
        "min": 0,
        "max": 1
      }
    ]
  },
  {
    "id": "SignalLock",
    "name": "Signal Lock",
    "blurb": "Static, rolling sync bars, then the picture snaps in like a tuner acquiring.",
    "file": "SignalLock.glsl",
    "params": [
      {
        "name": "noiseAmount",
        "default": 0.85,
        "min": 0,
        "max": 1
      },
      {
        "name": "rollSpeed",
        "default": 2.4,
        "min": 0,
        "max": 8
      },
      {
        "name": "barCount",
        "default": 3,
        "min": 0,
        "max": 8
      },
      {
        "name": "tearAmount",
        "default": 0.12,
        "min": 0,
        "max": 0.5
      }
    ]
  },
  {
    "id": "SpectrumSweep",
    "name": "Spectrum Sweep",
    "blurb": "An analyzer band crosses the frame, drawing the incoming image as bars before it resolves.",
    "file": "SpectrumSweep.glsl",
    "params": [
      {
        "name": "bandWidth",
        "default": 0.22,
        "min": 0.05,
        "max": 0.6
      },
      {
        "name": "barCount",
        "default": 64,
        "min": 8,
        "max": 200
      },
      {
        "name": "glow",
        "default": 1.2,
        "min": 0,
        "max": 3
      },
      {
        "name": "floorLift",
        "default": 0.12,
        "min": 0,
        "max": 0.5
      }
    ]
  },
  {
    "id": "ThermalBloom",
    "name": "Thermal Bloom",
    "blurb": "The frame falls into false colour, blooms hot, and the next image cools back out of it.",
    "file": "ThermalBloom.glsl",
    "params": [
      {
        "name": "heat",
        "default": 1,
        "min": 0,
        "max": 1
      },
      {
        "name": "blur",
        "default": 0.01,
        "min": 0,
        "max": 0.05
      },
      {
        "name": "gain",
        "default": 0.35,
        "min": 0,
        "max": 1.2
      }
    ]
  },
  {
    "id": "TraceRoute",
    "name": "Trace Route",
    "blurb": "Copper traces route across the board and the new frame fills in behind them.",
    "file": "TraceRoute.glsl",
    "params": [
      {
        "name": "pitch",
        "default": 30,
        "min": 6,
        "max": 90
      },
      {
        "name": "wander",
        "default": 0.45,
        "min": 0,
        "max": 1
      },
      {
        "name": "traceGlow",
        "default": 1.4,
        "min": 0,
        "max": 3
      },
      {
        "name": "traceW",
        "default": 0.1,
        "min": 0.02,
        "max": 0.35
      }
    ]
  },
  {
    "id": "VanEck",
    "name": "Van Eck",
    "blurb": "The next frame reconstructs from raster noise, scanline by scanline, behind an acquisition beam.",
    "file": "VanEck.glsl",
    "params": [
      {
        "name": "lineCount",
        "default": 300,
        "min": 60,
        "max": 720
      },
      {
        "name": "smear",
        "default": 0.07,
        "min": 0,
        "max": 0.3
      },
      {
        "name": "jitter",
        "default": 0.35,
        "min": 0,
        "max": 1
      },
      {
        "name": "phosphor",
        "default": 1,
        "min": 0,
        "max": 1
      }
    ]
  }
]