# This file is part of FreePBX. # # For licensing information, please see the file named LICENSE located in the module directory # # FreePBX language template for iaxsettings # Copyright (C) 2008-2016 Sangoma, Inc. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2017-09-14 13:48+0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE Alex\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Poedit 2.0.3\n" "X-Poedit-Basepath: .\n" "X-Poedit-SearchPath-0: .\n" "X-Poedit-SearchPath-1: ru_RU/LC_MESSAGES\n" #: Sccp_manager.class msgid "General SCCP Settings" msgstr "" #: Sccp_manager.class msgid "SCCP Device" msgstr "" #: Sccp_manager.class msgid "SCCP Time" msgstr "" #: Sccp_manager.class msgid "SCCP Codec" msgstr "" #: Sccp_manager.class msgid "SCCP Device Keyset" msgstr "" #: Sccp_manager.class msgid "SCCP Model information" msgstr "" #: Sccp_manager.class msgid "Device configuration" msgstr "" #: Sccp_manager.class msgid "Device Buttons" msgstr "" #: Sccp_manager.class msgid "Device SCCP Codec" msgstr "" #: Sccp_manager.class msgid "SCCP Extension" msgstr "" #: Sccp_manager.class msgid "SCCP Phone" msgstr "" #: views/Buttons msgid "On" msgstr "" #: views/Buttons msgid "Off" msgstr "" #: views/Buttons msgid "Yes" msgstr "" #: views/Buttons msgid "No" msgstr "" #: views/Buttons msgid "Wink" msgstr "" #: views/Buttons msgid "Flash" msgstr "" #: views/Buttons msgid "Blink" msgstr "" #: views/Buttons msgid "Enabled" msgstr "" #: views/Buttons msgid "Disabled" msgstr "" #: views/sccpgeneral.xml msgid "SCCP Server config" msgstr "" #: views/sccpgeneral.xml msgid "Servername: This is the type of server - usually, it will be Asterisk." msgstr "" #: views/sccpgeneral.xml msgid "Bind Address : [ Port ]" msgstr "" #: views/sccpgeneral.xml: msgid "" "Bind Address: The address to bind to for SCCP. In general, it should be set " "to '0.0.0.0'. If you find problems with one-way audio, you can set this to a " "specific address in the server. Note that '127.0.0.1' is always wrong here." msgstr "" #: views/sccpgeneral.xml: msgid "External Ip" msgstr "" #: views/sccpgeneral.xml: msgid "" "External IP Address of the firewall, required in case the PBX is running on " "a seperatehost behind it. IP Address that we're going to notify in RTP media " "stream as the pbx source address." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP SERVER Keepalive" msgstr "" #: views/sccpgeneral.xml: msgid "" "Time between Keep Alive checks. Valid range is 60-300 seconds. After much " "trial-and-error, the minimum (60) seems to work just fine." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP DEBUG" msgstr "" #: views/sccpgeneral.xml: msgid "Debug: Enable debugging level in SCCP module." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Networks" msgstr "" #: views/sccpgeneral.xml: msgid "" "Local network settings. Blank fields will be ignored used Network 0.0.0.0." msgstr "" #: views/sccpgeneral.xml: msgid "" "Alow network settings. Blank fields will be ignored used Network 0.0.0.0." msgstr "" #: views/sccpgeneral.xml: msgid "Deny Networks / Mask" msgstr "" #: views/sccpgeneral.xml: msgid "Add Deny network" msgstr "" #: views/sccpgeneral.xml: msgid "" "All RFC 1918 addresses are local networks. Should always be at least " "'0.0.0.0/0.0.0.0'." msgstr "" #: views/sccpgeneral.xml: msgid "Local Networks / Mask" msgstr "" #: views/sccpgeneral.xml: msgid "Add local networks" msgstr "" #: views/sccpgeneral.xml: msgid "" "All RFC 1918 addresses are local networks, example " "'192.168.1.0/255.255.255.0'" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Language" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP System Language" msgstr "" #: views/sccpgeneral.xml: msgid "" "SCCP Language: This is the language for your hints and other features of the " "phone. If you don't have any languages installed or are using a single " "language, you can leave this blank." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Network Device Language" msgstr "" #: views/sccpgeneral.xml: msgid "" "The Network locales allows the phone to play tones (ringing, busy etc.) " "native to the phone's country." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Phone Device Language" msgstr "" #: views/sccpgeneral.xml: msgid "" "The user locale allows the phone to display text (menu items, soft keys " "etc.) native to the phone's language." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Device config" msgstr "" #: views/sccpgeneral.xml: msgid "First Digit Timeout" msgstr "" #: views/sccpgeneral.xml: msgid "" "First Digit Timeout: The amount of time after your first digit to start " "dialing automatically. This can be over-ridden with settings in your " "dialplan.xml or by using the 'immediate dial' button." msgstr "" #: views/sccpgeneral.xml: msgid "Digit Timeout" msgstr "" #: views/sccpgeneral.xml: msgid "" "Digit Timeout: The amount of time to wait after the second (or subsequent) " "dialed digit. Override rules are the same as for firstdigittimeout." msgstr "" #: views/sccpgeneral.xml: msgid "Autoanswer Ring Time" msgstr "" #: views/sccpgeneral.xml: msgid "" "Autoanswer Ring Time: The amount of time the phones will ring when being " "called as Intercom or Paging mode." msgstr "" #: views/sccpgeneral.xml: msgid "Autoanswer Tone" msgstr "" #: views/sccpgeneral.xml: msgid "" "Autoanswer Tone: The tone the phone plays back when it picks up the phone in " "autoanswer mode. Default is '0x32'. Silence is '0x00'. There are lots of " "tones, all expressed as '0XNN' where 'NN' is a hexadecimal number." msgstr "" #: views/sccpgeneral.xml: msgid "Remote Hangup Tone" msgstr "" #: views/sccpgeneral.xml: msgid "" "Remote Hangup Tone: The tone played by the phone when it received a remote " "hang-up signal. Use '0' to disable the tone." msgstr "" #: views/sccpgeneral.xml: msgid "Transfer Tone" msgstr "" #: views/sccpgeneral.xml: msgid "" "Transfer Tone: The tone played when a call is transferred. Use '0' to " "disable the tone." msgstr "" #: views/sccpgeneral.xml: msgid "Call Waiting Tone" msgstr "" #: views/sccpgeneral.xml: msgid "" "Call Waiting Tone: The tone played when a call is waiting. If you set this " "one to '0', you will not get a tone in your current call if a new call comes " "in, so you might want to disable call waiting for this line instead." msgstr "" #: views/sccpgeneral.xml: msgid "Echo Cancel" msgstr "" #: views/sccpgeneral.xml: msgid "Echo Cancel: Echo Cancellation (On or Off)." msgstr "" #: views/sccpgeneral.xml: msgid "Silence Suppression" msgstr "" #: views/sccpgeneral.xml: msgid "Silence Suppression: Slience Suppression on the phone." msgstr "" #: views/sccpgeneral.xml: msgid "Private Calling" msgstr "" #: views/sccpgeneral.xml: msgid "" "Private Calling Enabled: Place a call with privacy Options (no Caller ID) " "turned on. Needs to be supported in Asterisk to work through SIP and DAHDI " "trunks." msgstr "" #: views/sccpgeneral.xml: msgid "Directed Pickup" msgstr "" #: views/sccpgeneral.xml: msgid "" "Directed Pickup Mode (Answer): If a call is sent with the \"directed pickup" "\" flag, the phone will answer when set to \"Yes\"." msgstr "" #: views/sccpgeneral.xml: msgid "Call Answer Order" msgstr "" #: views/sccpgeneral.xml: msgid "" "Call Answer Order: Which call should be answered first? The most common " "choice is \"oldestfirst\", but other orders are supported." msgstr "" #: views/sccpgeneral.xml: msgid "Message Lamp" msgstr "" #: views/sccpgeneral.xml: ------------- msgid "Set the MWI lamp style when MWI active to on, off, wink, flash or blink" msgstr "" #: views/sccpgeneral.xml: msgid "Message Lamp On Call" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP NTP Service config" msgstr "" #: views/sccpgeneral.xml: msgid "NTP Server Enabled" msgstr "" #: views/sccpgeneral.xml: msgid "Enabling NTP settings in device configuration." msgstr "" #: views/sccpgeneral.xml: msgid "NTP Server name (ip)" msgstr "" #: views/sccpgeneral.xml: msgid "NTP Server name or IP" msgstr "" #: views/sccpgeneral.xml: msgid "Configure NTP Server protocol time syncronization" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Time Service config" msgstr "" #: views/sccpgeneral.xml: msgid "Display Day Format" msgstr "" #: views/sccpgeneral.xml: msgid "" "Date Format: The date format for the on-screen display. Can be one of the " "following: (D-M-YA, M.D.Y, Y/M/D) where 'D' is Day, 'M' is Month, 'Y' is " "Year, 'A' is 24-hour, 'a' is 12-hour, and the separators can be '.','-','/'" msgstr "" #: views/sccpgeneral.xml: msgid "Time Zone" msgstr "" #: views/sccpgeneral.xml: msgid "Date Format: Time zone" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP URL Service config" msgstr "" #: views/sccpgeneral.xml: msgid "Phone Service URL" msgstr "" #: views/sccpgeneral.xml: msgid "Phone authentication URLe" msgstr "" #: views/sccpgeneral.xml: msgid "" "The above is simply a dummy authentication page. It literally contains one " "word: AUTHORIZED (it receives UserId, Password, and devicename in the url - " "if you truly wish to implement special auth)" msgstr "" #: views/sccpgeneral.xml: msgid "Phone Idle information URL" msgstr "" #: views/sccpgeneral.xml: msgid "URL of CiscoIPPhoneImage. Requires a non-zero setting in idleTimeout." msgstr "" #: views/sccpgeneral.xml: msgid "Phone information URL" msgstr "" #: views/sccpgeneral.xml: msgid "Phone messages URL" msgstr "" #: views/sccpgeneral.xml: msgid "Phone directory service URL" msgstr "" #: views/sccpgeneral.xml: msgid "" "This is the URL for a CiscoIPPhoneMenu which gets appended to the end of the " "Missed/Received/Placed calls. I don't use it (I find it makes more sense to " "put my phone book under services)" msgstr "" #: views/sccpgeneral.xml: msgid "Phone proxyServer URL" msgstr "" #: views/sccpgeneral.xml: msgid "Phone Idle Timeout" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP QoS config" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP ToS / CoS" msgstr "" #: views/sccpgeneral.xml: msgid "" "SCCP Type Of Service / Class Of Service: SCCP Type or Class of Service - " "this is modifiable, but don't." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Audio ToS / CoS" msgstr "" #: views/sccpgeneral.xml: msgid "" "Audio Type Of Service / Class Of Service: Audio Type or Class of Service - " "this is modifiable, but don't." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Video ToS / CoS" msgstr "" #: views/sccpgeneral.xml: msgid "" "Video Type Of Service / Class Of Service: Video Type or Class of Service - " "this is modifiable, but don't." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Line config" msgstr "" #: views/sccpgeneral.xml: msgid "Hotline" msgstr "" #: views/sccpgeneral.xml: msgid "" "Hotline Enabled: This allows unregistered extensions to connect to the " "system and dial the number listed below." msgstr "" #: views/sccpgeneral.xml: msgid "Hotline extension" msgstr "" #: views/sccpgeneral.xml: msgid "" "Hotline Extension: The number that gets called when a hotline is picked up. " "hint" msgstr "" #: views/sccpgeneral.xml: msgid "Hotline Context" msgstr "" #: views/sccpgeneral.xml: msgid "" "Hotline Context: This is the context through which the phone will connect. " "It should probably match your other contest. The default is \"from-internal" "\" but \"from-internal-xfer\" would also make sense by limiting the options " "for the person using the phone." msgstr "" #: views/sccpgeneral.xml: msgid "System Context" msgstr "" #: views/sccpgeneral.xml: msgid "" "Context: This is the context in which your phones will operate. It should " "match the context you are using for the rest of your phones (if you have " "any). The FreePBX default is 'from-internal'" msgstr "" #: views/sccpgeneral.xml: msgid "Dynamically registration Context" msgstr "" #: views/sccpgeneral.xml: msgid "" "If regcontext is specified in sccp.conf chan-sccp-b will dynamically create " "and destroy a NoOp priority 1 extension for a given peer/line which " "registers with the server. If the context is not specified in extension." "conf, then it will be dynamically created when an chan-sccp-b agent registers" msgstr "" #: views/sccpgeneral.xml: msgid "Music On Hold Class" msgstr "" #: views/sccpgeneral.xml: msgid "" "Music Class: Available MOH Classes. These are the MOH classes listed in your " "current server." msgstr "" #: views/sccpgeneral.xml: msgid "Autoselect Line" msgstr "" #: views/sccpgeneral.xml: msgid "Enables and disables auto line selection." msgstr "" #: views/sccpgeneral.xml: msgid "Meetme Conference" msgstr "" #: views/sccpgeneral.xml: msgid "" "enable/disable conferencing via meetme (on/off), make sure you have one of " "the meetme apps mentioned below activated in module.conf" msgstr "" #: views/sccpgeneral.xml: msgid "Meetme Options" msgstr "" #: views/sccpgeneral.xml: msgid "" "Other options (app_meetme: A,a,b,c,C,d,D,E,e,F,i,I,l,L,m,M,o,p,P,q,r,s,S,t,T," "w,x,X,1) see meetme specific documentation" msgstr "" #: views/sccpgeneral.xml: msgid "Auto Call Select" msgstr "" #: views/sccpgeneral.xml: msgid "Background Image" msgstr "" #: views/sccpgeneral.xml: msgid "" "I'm guessing on this one, but on some devices, the background image on the " "display can be modified at the device. I think this is the thing that allows " "that to take." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP Server Path config" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP TFTP SERVER Path" msgstr "" #: views/sccpgeneral.xml: msgid "Path to tftp home directory" msgstr "" #: views/sccpgeneral.xml: msgid "SCCP SERVER MySQL Device Table Name" msgstr "" #: views/sccpgeneral.xml: msgid "" "Device Table: This is the devicetable for your realtime configuration. Don't " "change this unless you know what you are doing and have made all the " "appropriate changes in the rest of your Asterisk config files. There are two " "reasonable settings for this - the sccpdevice table or the sccpdeviceconfig " "view. If you do not want to use the realtime database anymore, you can set " "this to blank. NOT RECOMMENDED." msgstr "" #: views/sccpgeneral.xml: msgid "SCCP SERVER MySQL Line Table Name" msgstr "" #: views/sccpgeneral.xml: msgid "linetable" msgstr "" #: views/sccpgeneral.xml: msgid "" "Line Table: This is the linetable for your realtime configuration. Don't " "change this unless you know what you are doing and have made all the " "appropriate changes in the rest of your Asterisk config files. If you do not " "want to use the realtime database anymore, you can set this to blank. NOT " "RECOMMENDED." msgstr "" #: views/sccpgeneral.xml: msgid "Create tftp empty language dir" msgstr "" #: views/sccpgeneral.xml: msgid "" "Say 'yes' if you need to create cisco default language directory in tftp " "path." msgstr "" #: views/sccpgeneral.xml: msgid "General Device configuration" msgstr "" #: views/sccpgeneral.xml: msgid "Device SEP ID.[XXXXXXXXXXXX]=MAC" msgstr "" #: views/sccpgeneral.xml: msgid "The MAC address of the phone. You must specify 12 characters in the format XXXX.XXXX.XXXX or XX-XX-XX-XX-XX-XX or XXXXXXXXXXXX" msgstr "" #: views/sccpgeneral.xml: msgid "Type" msgstr "" #: views/sccpgeneral.xml: msgid "" "The type of phone: 7911, 7940, 7960, etc. Important note: the 'G' models are " "handled as the base model (e.g., 7962G is handled as 7962). In the Display " "mode, this field is read-only because the MAC address and the model number " "are a pair." msgstr "" #: views/sccpgeneral.xml: msgid "Addon" msgstr "" #: views/sccpgeneral.xml: msgid "" "Addon: Addons are model specific and only work with certain base phones. " "This phone model is identified as being a phone that does not accept " "sidecars. Update devmodel if this is not correct." msgstr "" #: views/sccpgeneral.xml: msgid "Device Label" msgstr "" #: views/sccpgeneral.xml: msgid "Device SEP ID" msgstr "" #: views/sccpgeneral.xml: msgid "The information in the upper right corner of the device screen" msgstr "" #: views/sccpgeneral.xml: msgid "Soft Keyset" msgstr "" #: views/sccpgeneral.xml: msgid "System default softkey" msgstr "" #: views/sccpgeneral.xml: msgid "Time Zone offset" msgstr "" #: views/sccpgeneral.xml: msgid "" "For phones that can display background images - display this one. Default is " "[empty]" msgstr "" #: views/sccpgeneral.xml: msgid "Ringtone" msgstr "" #: views/sccpgeneral.xml: msgid "" "The ringtone that the phone will default to. Can be overridden in the phone. " "The files RINGLIST.XML provice the basic phone ring tones, while " "DISTINCTIVERINGLIST.XML defines the list of possible ring tones for your " "other line types. They, along with the actual 'raw' ringtones, are stored in " "the /tftpboot/ directory with the rest of the config files." msgstr "" #: views/sccpgeneral.xml: views/form.buttons: ----------------------------- msgid "Buttons Configuration" msgstr "" #: views/sccpgeneral.xml: msgid "Device MAC SEP." msgstr "" #: views/sccpgeneral.xml: msgid "Device Properies" msgstr "" #: views/sccpgeneral.xml: msgid "Transfer allowed" msgstr "" #: views/sccpgeneral.xml: msgid "Callforward softkeys" msgstr "" #: views/sccpgeneral.xml: msgid "Activate the callforward softkeys. Default is On" msgstr "" #: views/sccpgeneral.xml: msgid "Callforward busy softkeys" msgstr "" #: views/sccpgeneral.xml: msgid "Redial from Menu" msgstr "" #: views/sccpgeneral.xml: msgid "" "You can specifying 'useRedialMenu = yes' in the sccp.conf device section and " "the redial softkey will cause the 'placed calls' list instead of immediately " "calling the last dialed number." msgstr "" #: views/sccpgeneral.xml: msgid "DND Button on Device" msgstr "" #: views/sccpgeneral.xml: msgid "Do Not Disturb. Default is Off" msgstr "" #: views/sccpgeneral.xml: msgid "Dual-Tone Multi-Frequency" msgstr "" #: views/sccpgeneral.xml: msgid "Dual-Tone Multi-Frequency: outofband is the native cisco dtmf tone play" msgstr "" #: views/sccpgeneral.xml: msgid "Enable Pickup function to direct pickup an extension. Default is On" msgstr "" #: views/sccpgeneral.xml: msgid "Pickup Mode Answer" msgstr "" #: views/sccpgeneral.xml: msgid "" "On (Default)= the call has been answered when picked up. Off = call manager " "way, the phone who picked up the call rings the call" msgstr "" #: views/sccpgeneral.xml: msgid "Pickup Context" msgstr "" #: views/sccpgeneral.xml: msgid "" "Context where direct pickup search for extensions. if not set current " "contect will be use." msgstr "" #: views/sccpgeneral.xml: msgid "Device Conference Function" msgstr "" #: views/sccpgeneral.xml: msgid "Enabled Conference function" msgstr "" #: views/sccpgeneral.xml: msgid "Allow the use of conference" msgstr "" #: views/sccpgeneral.xml: msgid "Playback General Announcements" msgstr "" #: views/sccpgeneral.xml: msgid "" "Playback General Announcements (like: 'You are Entering/Leaving the " "conference')" msgstr "" #: views/sccpgeneral.xml: msgid "Playback Personal Announcements" msgstr "" #: views/sccpgeneral.xml: msgid "" "Playback Personal/Participant Announcements, (like: 'You have been muted / " "You have been kicked')" msgstr "" #: views/sccpgeneral.xml: msgid "Mute on start" msgstr "" #: views/sccpgeneral.xml: msgid "Mute new participants from the start" msgstr "" #: views/sccpgeneral.xml: msgid "Show conference list" msgstr "" #: views/sccpgeneral.xml: msgid "Automatically show conference list to the moderator" msgstr "" #: views/sccpgeneral.xml: msgid "" "Play music on hold of this class when no moderator is listening on the " "conference. If set to an empty string, no music on hold will be played." msgstr "" #: views/sccpgeneral.xml: msgid "Device Network Function" msgstr "" #: views/sccpgeneral.xml: msgid "Alow Networks / Mask" msgstr "" #: views/sccpgeneral.xml: msgid "" "IP deny: IP Address deny netmask. Should always be at least " "'0.0.0.0/0.0.0.0'." msgstr "" #: views/sccpgeneral.xml: msgid "NAT Device" msgstr "" #: views/sccpgeneral.xml: msgid "Device NAT support (default Off)" msgstr "" #: views/sccpgeneral.xml: msgid "Directrtp Device" msgstr "" #: views/sccpgeneral.xml: msgid "This option allow devices to do direct RTP sessions (default Off)" msgstr "" #: views/sccpgeneral.xml: msgid "Early Rtp Device" msgstr "" #: views/sccpgeneral.xml: msgid "" "The audio strem will be open in the progress and connected state. Valid " "options: none, progress, offhook, dial, ringout. Default may be Progress." msgstr "" #: views/sccpgeneral.xml: msgid "Buttons" msgstr "" #: views/sccpgeneral.xml: msgid "" "buttons come in the following flavours:empty: Empty button (no options)line: " "Registers the line with identifier specified as [name]silent: buttons equal " "'Line' with out ringmonitor: buttons mode speeddial + show statusspeeddial: " "Adds a speeddial with label [name] and [option1] as number Optionally, " "[option2] can be used to specify a hint by extension@context as usual." "service (not implemented): Adds a service url Feature buttons have an on/off " "status represented on the device with a tick-box and can be used to set the " "device in a particular state. Currently Possible [option1],[option2] " "combinations:privacy,callpresent = Make a private call, number is " "suppressedprivacy,hint = Make a private call, hint is suppressedcfwdall," "number = Forward all calls cfwbusy,number = Forward on busycfwnoaswer,number " "= Forward on no-answer (not implemented yet)DND,busy = Do-not-disturb, " "return Busy signal to Caller DND,silent = Do-not-disturb, return nothing to " "callermonitor = Record Calls using AutoMon (asterisk 1.6.x only)
  • devstate,custom_devstate = Device State Feature Button (asterisk " "1.6.1 and up). custom_devstate is the name of the custom devicestate to be " "toggled (How to use devicestate)hold = To be implementedtransfer = To be " "implementedmultiblink = To be implementedmobility = To be " "implementedconference = To be implemented" msgstr "" #: views/server.model: msgid "Add model" msgstr "" #: views/server.model: msgid "Show Enabled" msgstr "" #: views/server.model: msgid "Expansion Module" msgstr "" #: views/server.model: msgid "Show All" msgstr "" #: views/server.model: msgid "Device Model" msgstr "" #: views/server.model: msgid "Vendor" msgstr "" #: views/server.model: msgid "Loadimage" msgstr "" #: views/server.model: msgid "Loadinformation ID" msgstr "" #: views/server.model: msgid "Model template" msgstr "" #: views/server.model: msgid "Modal title" msgstr "" #: views/server.model: msgid "Vendor name" msgstr "" #: views/server.model: msgid "Model Line Buttons" msgstr "" #: views/server.model: msgid "Load Image" msgstr "" #: views/server.model: msgid "Load Information ID" msgstr "" #: views/server.model: msgid "Model template XML" msgstr "" #: views/server.model: msgid "Close" msgstr "" #: views/server.model: msgid "Add New model whithout Enabled" msgstr "" #: views/server.model: msgid "Device is enabled" msgstr "" #: views/server.model: ---------------------------- msgid "Device Descriptions" msgstr "" #: views/server.model: msgid "Device type" msgstr "" #: views/server.model: msgid "Actions" msgstr "" #: views/server.model: msgid "Status" msgstr ""