up2k: avoid cloudflare upload size-limit

previously, the biggest file that could be uploaded through
cloudflare was 383 GiB, due to max num chunks being 4096

`--u2sz`, which takes three ints (min-size, target, max-size)
can now be used to enforce a max chunksize; chunks larger
than max-size gets split into smaller subchunks / chunklets

subchunks cannot be stitched/joined, and subchunks of the
same chunk must be uploaded sequentially, one at a time

if a subchunk fails due to bitflips or connection-loss,
then the entire chunk must (and will) be reuploaded

README.md

@@ -219,7 +219,7 @@ also see [comparison to similar software](./docs/versus.md)
 * upload
   * ☑ basic: plain multipart, ie6 support
   * ☑ [up2k](#uploading): js, resumable, multithreaded
-    * **no filesize limit!** ...unless you use Cloudflare, then it's 383.9 GiB
+    * **no filesize limit!** even on Cloudflare
   * ☑ stash: simple PUT filedropper
   * ☑ filename randomizer
   * ☑ write-only folders
@@ -654,7 +654,7 @@ up2k has several advantages:
   * uploads resume if you reboot your browser or pc, just upload the same files again
   * server detects any corruption; the client reuploads affected chunks
   * the client doesn't upload anything that already exists on the server
-  * no filesize limit unless imposed by a proxy, for example Cloudflare, which blocks uploads over 383.9 GiB
+  * no filesize limit, even when a proxy limits the request size (for example Cloudflare)
 * much higher speeds than ftp/scp/tarpipe on some internet connections (mainly american ones) thanks to parallel connections
 * the last-modified timestamp of the file is preserved
 
@@ -690,6 +690,8 @@ note that since up2k has to read each file twice, `[🎈] bup` can *theoreticall
 
 if you are resuming a massive upload and want to skip hashing the files which already finished, you can enable `turbo` in the `[⚙️] config` tab, but please read the tooltip on that button
 
+if the server is behind a proxy which imposes a request-size limit, you can configure up2k to sneak below the limit with server-option `--u2sz` (the default is 96 MiB to support Cloudflare)
+
 
 ### file-search
 

bin/u2c.py

@@ -1,8 +1,8 @@
 #!/usr/bin/env python3
 from __future__ import print_function, unicode_literals
 
-S_VERSION = "2.3"
+S_VERSION = "2.4"
-S_BUILD_DT = "2024-10-15"
+S_BUILD_DT = "2024-10-16"
 
 """
 u2c.py: upload to copyparty
@@ -270,7 +270,7 @@ class FileSlice(object):
                 raise Exception(9)
             tlen += clen
 
-        self.len = tlen
+        self.len = self.tlen = tlen
         self.cdr = self.car + self.len
         self.ofs = 0  # type: int
 
@@ -278,6 +278,28 @@ class FileSlice(object):
         self.seek = self._seek0
         self.read = self._read0
 
+    def subchunk(self, maxsz, nth):
+        if self.tlen <= maxsz:
+            return -1
+
+        if not nth:
+            self.car0 = self.car
+            self.cdr0 = self.cdr
+
+        self.car = self.car0 + maxsz * nth
+        if self.car >= self.cdr0:
+            return -2
+
+        self.cdr = self.car + min(self.cdr0 - self.car, maxsz)
+        self.len = self.cdr - self.car
+        self.seek(0)
+        return nth
+
+    def unsub(self):
+        self.car = self.car0
+        self.cdr = self.cdr0
+        self.len = self.tlen
+
     def _open(self):
         self.seek = self._seek
         self.read = self._read
@@ -805,8 +827,8 @@ def handshake(ar, file, search):
     return r["hash"], r["sprs"]
 
 
-def upload(fsl, stats):
+def upload(fsl, stats, maxsz):
-    # type: (FileSlice, str) -> None
+    # type: (FileSlice, str, int) -> None
     """upload a range of file data, defined by one or more `cid` (chunk-hash)"""
 
     ctxt = fsl.cids[0]
@@ -824,21 +846,33 @@ def upload(fsl, stats):
     if stats:
         headers["X-Up2k-Stat"] = stats
 
+    nsub = 0
     try:
-        sc, txt = web.req("POST", fsl.file.url, headers, fsl, MO)
+        while nsub != -1:
+            nsub = fsl.subchunk(maxsz, nsub)
+            if nsub == -2:
+                return
+            if nsub >= 0:
+                headers["X-Up2k-Subc"] = str(maxsz * nsub)
+                headers.pop(CLEN, None)
+                nsub += 1
 
-        if sc == 400:
+            sc, txt = web.req("POST", fsl.file.url, headers, fsl, MO)
-            if (
-                "already being written" in txt
-                or "already got that" in txt
-                or "only sibling chunks" in txt
-            ):
-                fsl.file.nojoin = 1
 
-        if sc >= 400:
+            if sc == 400:
-            raise Exception("http %s: %s" % (sc, txt))
+                if (
+                    "already being written" in txt
+                    or "already got that" in txt
+                    or "only sibling chunks" in txt
+                ):
+                    fsl.file.nojoin = 1
+
+            if sc >= 400:
+                raise Exception("http %s: %s" % (sc, txt))
     finally:
         fsl.f.close()
+        if nsub != -1:
+            fsl.unsub()
 
 
 class Ctl(object):
@@ -970,7 +1004,7 @@ class Ctl(object):
                     print("  %d up %s" % (ncs - nc, cid))
                     stats = "%d/0/0/%d" % (nf, self.nfiles - nf)
                     fslice = FileSlice(file, [cid])
-                    upload(fslice, stats)
+                    upload(fslice, stats, self.ar.szm)
 
             print("  ok!")
             if file.recheck:
@@ -1318,7 +1352,7 @@ class Ctl(object):
                 self._check_if_done()
                 continue
 
-            njoin = (self.ar.sz * 1024 * 1024) // chunksz
+            njoin = self.ar.sz // chunksz
             cs = hs[:]
             while cs:
                 fsl = FileSlice(file, cs[:1])
@@ -1370,7 +1404,7 @@ class Ctl(object):
             )
 
             try:
-                upload(fsl, stats)
+                upload(fsl, stats, self.ar.szm)
             except Exception as ex:
                 t = "upload failed, retrying: %s #%s+%d (%s)\n"
                 eprint(t % (file.name, cids[0][:8], len(cids) - 1, ex))
@@ -1459,6 +1493,7 @@ source file/folder selection uses rsync syntax, meaning that:
     ap.add_argument("-j", type=int, metavar="CONNS", default=2, help="parallel connections")
     ap.add_argument("-J", type=int, metavar="CORES", default=hcores, help="num cpu-cores to use for hashing; set 0 or 1 for single-core hashing")
     ap.add_argument("--sz", type=int, metavar="MiB", default=64, help="try to make each POST this big")
+    ap.add_argument("--szm", type=int, metavar="MiB", default=96, help="max size of each POST (default is cloudflare max)")
     ap.add_argument("-nh", action="store_true", help="disable hashing while uploading")
     ap.add_argument("-ns", action="store_true", help="no status panel (for slow consoles and macos)")
     ap.add_argument("--cd", type=float, metavar="SEC", default=5, help="delay before reattempting a failed handshake/upload")
@@ -1486,6 +1521,9 @@ source file/folder selection uses rsync syntax, meaning that:
     if ar.dr:
         ar.ow = True
 
+    ar.sz *= 1024 * 1024
+    ar.szm *= 1024 * 1024
+
     ar.x = "|".join(ar.x or [])
 
     setattr(ar, "wlist", ar.url == "-")

copyparty/__main__.py

@@ -1017,7 +1017,7 @@ def add_upload(ap):
     ap2.add_argument("--sparse", metavar="MiB", type=int, default=4, help="windows-only: minimum size of incoming uploads through up2k before they are made into sparse files")
     ap2.add_argument("--turbo", metavar="LVL", type=int, default=0, help="configure turbo-mode in up2k client; [\033[32m-1\033[0m] = forbidden/always-off, [\033[32m0\033[0m] = default-off and warn if enabled, [\033[32m1\033[0m] = default-off, [\033[32m2\033[0m] = on, [\033[32m3\033[0m] = on and disable datecheck")
     ap2.add_argument("--u2j", metavar="JOBS", type=int, default=2, help="web-client: number of file chunks to upload in parallel; 1 or 2 is good for low-latency (same-country) connections, 4-8 for android clients, 16 for cross-atlantic (max=64)")
-    ap2.add_argument("--u2sz", metavar="N,N,N", type=u, default="1,64,96", help="web-client: default upload chunksize (MiB); sets \033[33mmin,default,max\033[0m in the settings gui. Each HTTP POST will aim for this size. Cloudflare max is 96. Big values are good for cross-atlantic but may increase HDD fragmentation on some FS. Disable this optimization with [\033[32m1,1,1\033[0m]")
+    ap2.add_argument("--u2sz", metavar="N,N,N", type=u, default="1,64,96", help="web-client: default upload chunksize (MiB); sets \033[33mmin,default,max\033[0m in the settings gui. Each HTTP POST will aim for \033[33mdefault\033[0m, and never exceed \033[33mmax\033[0m. Cloudflare max is 96. Big values are good for cross-atlantic but may increase HDD fragmentation on some FS. Disable this optimization with [\033[32m1,1,1\033[0m]")
     ap2.add_argument("--u2sort", metavar="TXT", type=u, default="s", help="upload order; [\033[32ms\033[0m]=smallest-first, [\033[32mn\033[0m]=alphabetical, [\033[32mfs\033[0m]=force-s, [\033[32mfn\033[0m]=force-n -- alphabetical is a bit slower on fiber/LAN but makes it easier to eyeball if everything went fine")
     ap2.add_argument("--write-uplog", action="store_true", help="write POST reports to textfiles in working-directory")
 

copyparty/httpcli.py

@@ -1884,7 +1884,7 @@ class HttpCli(object):
         f, fn = ren_open(fn, *open_a, **params)
         try:
             path = os.path.join(fdir, fn)
-            post_sz, sha_hex, sha_b64 = hashcopy(reader, f, self.args.s_wr_slp)
+            post_sz, sha_hex, sha_b64 = hashcopy(reader, f, None, 0, self.args.s_wr_slp)
         finally:
             f.close()
 
@@ -2348,7 +2348,7 @@ class HttpCli(object):
         broker = self.conn.hsrv.broker
         x = broker.ask("up2k.handle_chunks", ptop, wark, chashes)
         response = x.get()
-        chashes, chunksize, cstarts, path, lastmod, sprs = response
+        chashes, chunksize, cstarts, path, lastmod, fsize, sprs = response
         maxsize = chunksize * len(chashes)
         cstart0 = cstarts[0]
         locked = chashes  # remaining chunks to be received in this request
@@ -2356,6 +2356,50 @@ class HttpCli(object):
         num_left = -1  # num chunks left according to most recent up2k release
         treport = time.time()  # ratelimit up2k reporting to reduce overhead
 
+        if "x-up2k-subc" in self.headers:
+            sc_ofs = int(self.headers["x-up2k-subc"])
+            chash = chashes[0]
+
+            u2sc = self.conn.hsrv.u2sc
+            try:
+                sc_pofs, hasher = u2sc[chash]
+                if not sc_ofs:
+                    t = "client restarted the chunk; forgetting subchunk offset %d"
+                    self.log(t % (sc_pofs,))
+                    raise Exception()
+            except:
+                sc_pofs = 0
+                hasher = hashlib.sha512()
+
+            et = "subchunk protocol error; resetting chunk "
+            if sc_pofs != sc_ofs:
+                u2sc.pop(chash, None)
+                t = "%s[%s]: the expected resume-point was %d, not %d"
+                raise Pebkac(400, t % (et, chash, sc_pofs, sc_ofs))
+            if len(cstarts) > 1:
+                u2sc.pop(chash, None)
+                t = "%s[%s]: only a single subchunk can be uploaded in one request; you are sending %d chunks"
+                raise Pebkac(400, t % (et, chash, len(cstarts)))
+            csize = min(chunksize, fsize - cstart0[0])
+            cstart0[0] += sc_ofs  # also sets cstarts[0][0]
+            sc_next_ofs = sc_ofs + postsize
+            if sc_next_ofs > csize:
+                u2sc.pop(chash, None)
+                t = "%s[%s]: subchunk offset (%d) plus postsize (%d) exceeds chunksize (%d)"
+                raise Pebkac(400, t % (et, chash, sc_ofs, postsize, csize))
+            else:
+                final_subchunk = sc_next_ofs == csize
+                t = "subchunk %s %d:%d/%d %s"
+                zs = "END" if final_subchunk else ""
+                self.log(t % (chash[:15], sc_ofs, sc_next_ofs, csize, zs), 6)
+                if final_subchunk:
+                    u2sc.pop(chash, None)
+                else:
+                    u2sc[chash] = (sc_next_ofs, hasher)
+        else:
+            hasher = None
+            final_subchunk = True
+
         try:
             if self.args.nw:
                 path = os.devnull
@@ -2386,9 +2430,11 @@ class HttpCli(object):
                     reader = read_socket(
                         self.sr, self.args.s_rd_sz, min(remains, chunksize)
                     )
-                    post_sz, _, sha_b64 = hashcopy(reader, f, self.args.s_wr_slp)
+                    post_sz, _, sha_b64 = hashcopy(
+                        reader, f, hasher, 0, self.args.s_wr_slp
+                    )
 
-                    if sha_b64 != chash:
+                    if sha_b64 != chash and final_subchunk:
                         try:
                             self.bakflip(
                                 f, path, cstart[0], post_sz, chash, sha_b64, vfs.flags
@@ -2420,7 +2466,8 @@ class HttpCli(object):
 
                     # be quick to keep the tcp winsize scale;
                     # if we can't confirm rn then that's fine
-                    written.append(chash)
+                    if final_subchunk:
+                        written.append(chash)
                     now = time.time()
                     if now - treport < 1:
                         continue
@@ -2813,7 +2860,7 @@ class HttpCli(object):
                         tabspath = os.path.join(fdir, tnam)
                         self.log("writing to {}".format(tabspath))
                         sz, sha_hex, sha_b64 = hashcopy(
-                            p_data, f, self.args.s_wr_slp, max_sz
+                            p_data, f, None, max_sz, self.args.s_wr_slp
                         )
                         if sz == 0:
                             raise Pebkac(400, "empty files in post")
@@ -3145,7 +3192,7 @@ class HttpCli(object):
             wunlink(self.log, fp, vfs.flags)
 
         with open(fsenc(fp), "wb", self.args.iobuf) as f:
-            sz, sha512, _ = hashcopy(p_data, f, self.args.s_wr_slp)
+            sz, sha512, _ = hashcopy(p_data, f, None, 0, self.args.s_wr_slp)
 
         if lim:
             lim.nup(self.ip)

copyparty/httpsrv.py

@@ -1,6 +1,7 @@
 # coding: utf-8
 from __future__ import print_function, unicode_literals
 
+import hashlib
 import math
 import os
 import re
@@ -144,6 +145,7 @@ class HttpSrv(object):
         self.t_periodic: Optional[threading.Thread] = None
 
         self.u2fh = FHC()
+        self.u2sc: dict[str, tuple[int, "hashlib._Hash"]] = {}
         self.pipes = CachedDict(0.2)
         self.metrics = Metrics(self)
         self.nreq = 0

copyparty/up2k.py

@@ -2891,9 +2891,6 @@ class Up2k(object):
                         "user": cj["user"],
                         "addr": ip,
                         "at": at,
-                        "hash": [],
-                        "need": [],
-                        "busy": {},
                     }
                     for k in ["life"]:
                         if k in cj:
@@ -2935,9 +2932,12 @@ class Up2k(object):
                     job = rj
                     break
 
-            if job and wark in reg:
+            if job:
-                # self.log("pop " + wark + "  " + job["name"] + " handle_json db", 4)
+                if wark in reg:
-                del reg[wark]
+                    del reg[wark]
+                job["hash"] = job["need"] = []
+                job["done"] = True
+                job["busy"] = {}
 
             if lost:
                 c2 = None
@@ -3373,7 +3373,7 @@ class Up2k(object):
 
     def handle_chunks(
         self, ptop: str, wark: str, chashes: list[str]
-    ) -> tuple[list[str], int, list[list[int]], str, float, bool]:
+    ) -> tuple[list[str], int, list[list[int]], str, float, int, bool]:
         with self.mutex, self.reg_mutex:
             self.db_act = self.vol_act[ptop] = time.time()
             job = self.registry[ptop].get(wark)
@@ -3456,7 +3456,7 @@ class Up2k(object):
 
         job["poke"] = time.time()
 
-        return chashes, chunksize, coffsets, path, job["lmod"], job["sprs"]
+        return chashes, chunksize, coffsets, path, job["lmod"], job["size"], job["sprs"]
 
     def fast_confirm_chunks(
         self, ptop: str, wark: str, chashes: list[str]

copyparty/util.py

@@ -2723,10 +2723,12 @@ def yieldfile(fn: str, bufsz: int) -> Generator[bytes, None, None]:
 def hashcopy(
     fin: Generator[bytes, None, None],
     fout: Union[typing.BinaryIO, typing.IO[Any]],
-    slp: float = 0,
+    hashobj: Optional["hashlib._Hash"],
-    max_sz: int = 0,
+    max_sz: int,
+    slp: float,
 ) -> tuple[int, str, str]:
-    hashobj = hashlib.sha512()
+    if not hashobj:
+        hashobj = hashlib.sha512()
     tlen = 0
     for buf in fin:
         tlen += len(buf)

copyparty/web/up2k.js

@@ -853,8 +853,13 @@ function up2k_init(subtle) {
 
     setmsg(suggest_up2k, 'msg');
 
+    var u2szs = u2sz.split(','),
+        u2sz_min = parseInt(u2szs[0]),
+        u2sz_tgt = parseInt(u2szs[1]),
+        u2sz_max = parseInt(u2szs[2]);
+
     var parallel_uploads = ebi('nthread').value = icfg_get('nthread', u2j),
-        stitch_tgt = ebi('u2szg').value = icfg_get('u2sz', u2sz.split(',')[1]),
+        stitch_tgt = ebi('u2szg').value = icfg_get('u2sz', u2sz_tgt),
         uc = {},
         fdom_ctr = 0,
         biggest_file = 0;
@@ -2574,8 +2579,7 @@ function up2k_init(subtle) {
             nparts = upt.nparts,
             pcar = nparts[0],
             pcdr = nparts[nparts.length - 1],
-            snpart = pcar == pcdr ? pcar : ('' + pcar + '~' + pcdr),
+            maxsz = u2sz_max * 1024 * 1024;
-            tries = 0;
 
         if (t.done)
             return console.log('done; skip chunk', t.name, t);
@@ -2595,6 +2599,30 @@ function up2k_init(subtle) {
         if (cdr >= t.size)
             cdr = t.size;
 
+        if (cdr - car <= maxsz)
+            return upload_sub(t, upt, pcar, pcdr, car, cdr, chunksize, 0, car, []);
+
+        var car0 = car, subs = [];
+        while (car < cdr) {
+            subs.push([car, Math.min(cdr, car + maxsz)]);
+            car += maxsz;
+        }
+        upload_sub(t, upt, pcar, pcdr, 0, 0, chunksize, car0, subs);
+    }
+
+    function upload_sub(t, upt, pcar, pcdr, car, cdr, chunksize, car0, subs) {
+        var nparts = upt.nparts,
+            is_sub = subs.length;
+
+        if (is_sub) {
+            var x = subs.shift();
+            car = x[0];
+            cdr = x[1];
+        }
+
+        var snpart = is_sub ? ('' + pcar + '(' + (car-car0) +'+'+ (cdr-car)) :
+                pcar == pcdr ? pcar : ('' + pcar + '~' + pcdr);
+
         var orz = function (xhr) {
             st.bytes.inflight -= xhr.bsent;
             var txt = unpre((xhr.response && xhr.response.err) || xhr.responseText);
@@ -2608,6 +2636,10 @@ function up2k_init(subtle) {
                 return;
             }
             if (xhr.status == 200) {
+                car = car0;
+                if (subs.length)
+                    return upload_sub(t, upt, pcar, pcdr, 0, 0, chunksize, car0, subs);
+
                 var bdone = cdr - car;
                 for (var a = pcar; a <= pcdr; a++) {
                     pvis.prog(t, a, Math.min(bdone, chunksize));
@@ -2674,7 +2706,7 @@ function up2k_init(subtle) {
                     toast.warn(9.98, L.u_cuerr.format(snpart, Math.ceil(t.size / chunksize), t.name), t);
 
                 t.nojoin = t.nojoin || t.postlist.length;  // maybe rproxy postsize limit
-                console.log('chunkpit onerror,', ++tries, t.name, t);
+                console.log('chunkpit onerror,', t.name, t);
                 orz2(xhr);
             };
 
@@ -2692,6 +2724,9 @@ function up2k_init(subtle) {
             xhr.open('POST', t.purl, true);
             xhr.setRequestHeader("X-Up2k-Hash", ctxt);
             xhr.setRequestHeader("X-Up2k-Wark", t.wark);
+            if (is_sub)
+                xhr.setRequestHeader("X-Up2k-Subc", car - car0);
+
             xhr.setRequestHeader("X-Up2k-Stat", "{0}/{1}/{2}/{3} {4}/{5} {6}".format(
                 pvis.ctr.ok, pvis.ctr.ng, pvis.ctr.bz, pvis.ctr.q, btot, btot - bfin,
                 st.eta.t.split(' ').pop()));
@@ -2812,11 +2847,11 @@ function up2k_init(subtle) {
     }
 
     var read_u2sz = function () {
-        var el = ebi('u2szg'), n = parseInt(el.value), dv = u2sz.split(',');
+        var el = ebi('u2szg'), n = parseInt(el.value);
         stitch_tgt = n = (
-            isNaN(n) ? dv[1] :
+            isNaN(n) ? u2sz_tgt :
-            n < dv[0] ? dv[0] :
+            n < u2sz_min ? u2sz_min :
-            n > dv[2] ? dv[2] : n
+            n > u2sz_max ? u2sz_max : n
         );
         if (n == dv[1]) sdrop('u2sz'); else swrite('u2sz', n);
         if (el.value != n) el.value = n;