#236: the wall canvas was secretly framebuffer space rather than the wall as
the audience sees it. Invisible while every panel is the normal way up, and
actively misleading the moment one isn't — two portrait-mounted panels standing
side by side had to be STACKED VERTICALLY in the editor, with a pre-rotated copy
of every video, before the output came out right. It worked, but only after
trial and error, and it meant a portrait wall could never reuse content as-is.
Each panel now carries a mounting rotation (0/90/180/270 clockwise, the same
convention as the per-device orientation setting), the canvas means the physical
wall, and the player works out the mapping. The geometry lives in one place,
server/lib/wall-geometry.js, because four players have to agree on it to the
pixel across a seam.
Existing walls need no migration and do not move. Every wall in the field is
rotation 0, and that case takes the original expression verbatim on all three
players rather than the algebraically-equal centre-based one — the two differ in
the last float bit, and a float's worth of disagreement between two panels is a
hairline seam down a wall that was aligned yesterday. Pinned by the first test
in wall-geometry.test.js and by wall-payload.test.js.
While a display is in a wall its panel rotation replaces its own orientation:
both describe the same physical fact, so honouring both turned the content twice.
#235: a wall replaced its members' cards, so one dead panel of a four-panel wall
was invisible from the dashboard, and inspecting a single screen meant pulling it
out of the live wall and putting it back. The wall screen now lists its panels
with live online state, a per-panel screenshot request, and a link to each
device's page; the dashboard wall card carries per-member status chips that track
socket updates.
Tests: wall-geometry.test.js re-simulates the CSS box independently and asserts
each panel's viewport maps onto exactly its own rect of wall space, for every
rotation, plus a mixed wall and the Tizen player's hand-ported copy executed
against the canonical rule. Full server suite green (1260).
Not verified here: the Android and Tizen renders on real hardware. Kotlin
compiles clean; the maths is shared/tested, the view plumbing is not.
Found deploying 1.9.29 to production. A worker's scope defaults to its own
directory, so /player/sw.js could only control /player/ and below; the fix was to
request a wider scope and permit it with Service-Worker-Allowed. That works right
up until something between the origin and the browser does not pass the header
on. Cloudflare served a CACHED response for that path across the deploy —
headers and all — and the registration failed outright.
A rejected registration is worse than a narrow one: the player runs with no
worker at all, on every URL, and nothing about it is visible from the server. The
origin was sending the header correctly the whole time; a cache-busted request
proved it. It self-heals when the edge entry expires, which is precisely the kind
of fix nobody should have to know about.
Served from /, the default scope is already the whole origin and no header has to
survive the trip — through Cloudflare, through whatever a self-hoster puts in
front of it, or through a corporate proxy we will never see. /player/sw.js keeps
serving for players still asking for it, and the header is still sent where it
does survive.
Verified in a real browser: all three of /player, /player/ and /player/index.html
are controlled from root scope.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
A BrightSign could see things the page cannot ask for — the uptime, the wired IP,
the video mode in force, which volume it booted from, whether a staged package
applied — and it printed all of it to a serial console. On a panel on a wall that
is the same as reporting nothing.
The cost was concrete and recent. A single bad string literal stopped the host
script compiling; the only evidence anywhere was one line on a cable, and from
the server the display looked identical to one that had never started. Diagnosing
it needed someone physically present with a serial adapter. Every other player
reports its own failures.
Three hops, each thin: the host posts, the bridge carries, the player emits on
the channels it already uses (device:log, device:event, and the telemetry the
heartbeat has carried for releases).
The pre-widget phase is the part that matters and the part that was hardest to
reach — the storage probe, a pending package being applied, the video mode being
set, all happen before there is a page to talk to. Those lines accumulate in a
buffer and flush the moment the widget exists, so the boot story arrives even
though it happened before anyone could listen. BrightScript has no global store
here (no GetGlobalAA), so the buffer is threaded explicitly; losing the boot
entirely was the worse option.
Two things become incidents rather than console lines: the watchdog rebuilding a
wedged widget, which is the most important thing a player does unattended and
previously healed in silence — a panel rebuilding itself every two minutes looked
exactly like a healthy one — and a load-error, which now names the resource that
failed. Both use event types the server actually accepts; an invented one is
dropped silently and would have been just as invisible.
Host telemetry merges into the existing snapshot rather than opening a channel,
and the host's numbers win where they overlap: navigator.storage.estimate()
describes the widget's cache quota, not the disk, so a panel can report gigabytes
free while the volume holding them is full.
Two API traps caught in my own new code before it shipped, both the same shape as
the ones being fixed: Str() applied to a value already documented as a String
(it is for numbers, and would abort the event loop while reporting a diagnostic),
and Stri() handed a float from an inline division. The checker now pins the first.
Verified on the XT245: boots clean, plays, online. The bridge and player halves
are served BY the server, so they take effect on the next deploy.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Found on alpha after deploying rc4, by comparing what a device advertised
against what it actually requested.
A real BrightSign XT245 has navigator.serviceWorker, passes an
`'serviceWorker' in navigator` check, and then never even fetches sw.js — its
widget runtime refuses the registration. It was declaring offline.cache to the
fleet while unable to cache a single byte, which is precisely the lie the
capability model exists to prevent. The claim is now made on a worker that is
actually IN CONTROL, and a refused registration sets a flag so the negative
sticks on a runtime where it will never succeed.
That failure previously went to console.warn, on a display nobody has a console
for, so a panel that could cache nothing looked identical to one that could. It
now reports app_error/sw_unavailable — as an allow-listed event type, since an
unknown one is dropped by the server and would have been just as invisible.
The cost is that the first load under-reports, before the worker claims the
page. That is the right direction to be wrong in, and it self-corrects: the next
register sends the true set.
Also corrects docs/player-parity.md, which claimed BrightSign simply inherits
the web player's service worker. The failing unit runs BSN's Supervisor rather
than our brightsign/autorun.brs, and Supervisor's widget has no storage_path —
the setting our own host script does configure and the precondition for a widget
having persistent storage. So this is likely a widget config issue rather than a
platform limit, but it is UNVERIFIED on hardware and the doc now says so.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Found by QA against a real browser, not by any test in the suite: the bug lived
entirely in the relationship between a URL and a header.
A service worker's default scope is its own directory, so /player/sw.js could
only ever control /player/ and below — which does not include /player itself.
The player is served at all three of /player, /player/ and /player/index.html,
and /player is the one that gets used: it is what the dashboard shows and what
gets typed into a panel. On that URL registration SUCCEEDED, logged "Service
Worker registered", and then controlled nothing. No shell cache, no content
cache, no offline playback, no error. Every web and BrightSign panel served at
/player has been running with its offline story switched off.
Registration now asks for scope '/' and the server sends Service-Worker-Allowed
to permit it. Both halves are required — without the header the registration
does not narrow, it fails outright.
Also: revision-keyed sweeping could not reclaim a replaced asset's predecessor.
A replace writes a NEW randomly-named file, so the superseded copy lives at a
different path entirely and nothing keyed on the asset path can find it; it
would sit there until the quota evicted it. The player now declares the complete
set of media it needs — the raw assignments, so multi-zone items are included
and a prune cannot delete something a zone is still playing — and the worker
drops everything else.
QA results this pass: web player 18/18 against a real browser (cold start with
no network renders a cached video at readyState 4); Android 12/12 on a device
including a replace round-trip that re-fetched 6MB and then dropped it for the
new bytes, and a cold start with the server stopped that played from disk;
Tizen 11/11 for the no-storage path, which must degrade to streaming and must
not claim a capability it cannot honour.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Two halves of the same problem. A screen has to keep playing when the link is
gone, and it must not keep playing the wrong thing once the link is back.
CACHING FOR OFFLINE, on the players that could not:
- Tizen cached nothing but the playlist, so a panel came back from a reboot
knowing exactly what to show and fetched every frame of it from a server that
was not there. tizen/js/media-cache.js caches the media itself to wgt-private
(the store Tizen documents as surviving reboots), resumable via Range and
If-Range, with the transfer async so a stalled chunk cannot freeze the player.
offline.cache moves from "absent" to a runtime claim: a build with no writable
private storage still says nothing.
- The web player's worker stored only what a single fetch() happened to
complete, which on a marginal link is nothing at all — a 200MB asset never
finishes in one go and every retry starts from zero. It now accumulates in
resumable chunks, driven by the player's playlist rather than by playback, so
the prefetch is not competing with the video that is currently on screen for
the same scarce bandwidth. BrightSign inherits this.
STILL UPDATING, which caching quietly breaks:
PUT /api/content/:id/replace changes an asset's bytes under a stable id. Every
cache keys on that id, so before this the new bytes could not reach a panel that
already held the old ones — not until the next refresh, but never. Content now
carries a revision, stamped onto each item at send time like widget revs, and
every player keys its cache on it. The same send-time refresh fixes a second
bug: a replace writes a new randomly-named file and unlinks the old one, so the
filepath in a published snapshot pointed at a deleted file and web panels 404'd
on the item until somebody republished the playlist. The route now also pushes
to affected devices, which it never did.
Bytes are kept only where they can be built upon: no validator means no safe
resume, so the partial is discarded and the attempt backs off as the failure it
is rather than re-fetching the same prefix forever.
Server needed no new transfer support — res.sendFile already does Range,
If-Range and 416. The Tizen cache and the service worker are both driven in Node
against fakes, because neither can be exercised without hardware and "the chunks
assemble correctly" is not something to discover from a panel showing a corrupt
video.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The dashboard offered every control to every display, so a browser tab showed a
reboot button that could never work. server/lib/player-capabilities.js defines the
vocabulary; this makes the web player actually speak it.
The declaration is computed, not constant, because the same index.html is BOTH the
browser player and the BrightSign player. system.reboot / display.power /
display.resolution / system.self_update are claimed only when BS.hasHost() answers —
deliberately hasHost() and not isBrightSign(), since the UA check is also true for a
widget built without node integration, which can reach none of them. Screenshots,
offline cache, transitions and native sync are each probed the same way.
Capabilities were never persisted: the column and the handler did not exist, so a
declaration would have been sent and silently dropped. Added the migration and
applyCapabilities(). An ABSENT declaration leaves the column NULL so the baseline
still applies — several hundred fielded displays declare nothing and would otherwise
lose every control at once — while an EMPTY declaration is stored as '[]' and honoured.
docs/player-parity.md records every capability against all four players with a reason
for each "no", and flags three Tizen baseline errors found while verifying it.
Tests: 1109/1109. Both inline <script> blocks in index.html parse clean.
Reported as "rotation doesn't work correctly". It is a geometry bug, not a
rendering one, which is why it reads as mysterious.
#playerContainer is pinned `inset: 0`. Rotation set width:100vh, height:100vw and
rotate(90deg) — leaving the box in the TOP-LEFT corner and spinning it about its
own centre rather than the viewport's. On a 1920x1080 panel the content landed at
x -420..1500, y 420..1500 against a viewport of 0..1920, 0..1080: correctly
rotated, wrongly placed, cropped on two edges.
Tizen already did this correctly — top/left 50% plus translate(-50%,-50%) — and
Android does the equivalent with translationX/Y of (w-h)/2. The web player was
the odd one out, and BrightSign inherited it on top of its own hardware-plane
problem.
The rule now lives in server/lib/orientation-style.js, served to the player from
its single source, with the arithmetic pinned by tests that compute where the
rotated box actually lands on 16:9 and 5:4 panels. Three things those tests hold
that are easy to get wrong: the translate must come BEFORE the rotate (transforms
apply right-to-left, so reversing them rotates the correction too), 180 must NOT
swap dimensions (the box already fits; swapping letterboxes it), and landscape
must clear EVERY property the rotated state set (a half-reset leaves the
container stuck at 100vh wide, so rotation appears to persist after switching
back).
1074 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Audited rotation across all four players after reports it misbehaves.
Android native rootView.rotation + layout swap — the ExoPlayer surface is
inside the rotated view, so video turns with it.
Tizen CSS for graphics AND AVPlay hardware-plane rotation for video. The
code says why: a CSS-rotated <video> "blacks out" on Tizen.
Web CSS transform. Correct — a browser composites video in the DOM.
BrightSign CSS transform only, inherited from the web player. BROKEN: with hwz
enabled the video decodes onto a hardware plane the DOM cannot
transform, so the images and widgets rotate and the video does not.
A portrait panel plays sideways video.
BrightSign is the platform that does not rotate correctly, and Tizen had already
found the same wall from the other side — any platform compositing video below
the DOM needs rotation done at the output.
roVideoMode takes a transform (normal/90/180/270) and rotating the screen rotates
EVERY layer, because it happens below the compositor rather than above it. The
player now asks the host first and, when the host succeeds, clears its own CSS
transform — otherwise the graphics rotate twice while the video rotates once.
The host reports success rather than assuming it: if it cannot rotate, the CSS
path stands, which turns most of the content instead of none of it, and the
promise resolves false rather than never settling. A portrait panel showing
landscape content with no clue why is the outcome worth avoiding.
1066 pass. The BrightScript needs hardware to verify; the decision path does not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Two things reviewed against the hardware.
REMOTE CAPTURE. An in-page canvas cannot read the hardware plane, so a
screenshot from a BrightSign is a composite with the video missing. The player
now asks the HOST, which uses the unit's own Diagnostic Web Server to capture the
real framebuffer, video included.
It has to run in BrightScript rather than the page for two reasons: the DWS is
http on localhost while the player is served over https, so the page would be
blocked as mixed content; and BrightScript is subject to neither CORS nor
mixed-content rules. Credentials are the documented default — user "admin",
password = the unit serial — which the host reads directly.
It requires PRIMARY STORAGE: the endpoint writes the full-size capture to disk
before returning a thumbnail, so a unit with no card or SSD answers "No primary
storage found." That message is passed through verbatim rather than swallowed,
and the canvas path still runs as a fallback, so a player with no disk keeps
producing the partial screenshot it can rather than nothing at all. Verified
against the real unit: the endpoint is reachable and blocked solely on storage.
THE STUCK TESTER. An opted-in player on 1.9.29-rc1 was told "holding prerelease
of the same core" when offered rc3 — so it would never move forward through
rc1 -> rc2 -> rc3, which is the opposite of what opting in is for, and would have
stopped our own XT245 ever receiving the next candidate.
The hold rule exists to stop a test build being dragged BACK to its release. It
now applies only when the advertised version IS that release: a newer prerelease
of the same core is offered normally, the release still cannot claw a tester
back, a newer core still lands, and a player that never opted in is still refused
a prerelease.
Also verified end to end on alpha: the advertised sha256 matches the served bytes
exactly, size matches, and every member of the package is stored.
1063 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Caught on hardware immediately after deploying rc3 to alpha: the player kept
playing content while reporting nothing at all, throwing every 15 seconds.
Uncaught TypeError: BS.telemetrySnapshot is not a function
The page was rc3 and the bridge it ran was older. Two causes, both fixed.
CACHE_NAME stayed at rd-player-v19 across a release that changed both the
service worker's fetch strategy and the shipped /player assets. The activate
handler deletes every cache whose name does not match, so keeping the name kept
the previous shell cache alive — including a stale st-bridge.js. Bumped to v20.
Content lives in its own cache, so this costs a small shell re-download and never
re-fetches a playlist.
The deeper defect is that the call site treated an optional bridge method as
guaranteed. It was the ONLY unguarded BS.* call in the player; every other one
checks or wraps. The bridge and the page are halves of one contract but are
fetched separately, so version skew is a normal condition, not an anomaly — it
must degrade, not throw. Now guarded on typeof, so a skewed pair reports the
fields it can and keeps heartbeating.
Worth naming the failure shape: the display looked perfectly healthy. Content
played, the socket connected, the device showed online — and telemetry silently
stopped. Anything that reports health through the same path it is breaking will
fail this way.
1056 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Muting was implemented three times and agreed nowhere. A YouTube item is a
cross-origin iframe, so `el.muted` reaches nothing; only the IFrame API can
touch it. Both browser-family players got this wrong, in opposite directions:
web playerVars.mute was `userHasInteracted ? 0 : 1` — autoplay policy and
NOTHING else. An item an operator muted in the admin console played
WITH SOUND, a wall follower blared alongside its leader, and the
real-time device:mute-changed toggle only ever touched `<video>`.
onReady then unmuted unconditionally, and the click-to-unmute overlay
appeared on deliberately-muted items and undid the operator's setting.
tizen the embed URL hardcoded `mute=1`, so YouTube there was PERMANENTLY
silent: the per-item flag was never read and nothing could unmute it.
device:mute-changed did nothing at all, because it dereferenced a
<video> that is null for a YouTube item.
Android was already correct and is unchanged — it is the reference here.
The rule now lives once, in server/lib/media-mute.js, served to the web player
from its single source the same way schedule-eval.js is, and mirrored in Tizen
(which ships inside the .wgt and cannot import it). The ORDER is the substance:
a wall follower is always silent (one wall, one audio source) > autoplay policy,
which is a hard constraint rather than a preference because unmuted playback
without a gesture is refused outright and costs the VIDEO > a live operator
toggle, who is looking at the screen > the item's stored flag.
shouldOfferUnmute() exists so the prompt only appears when a gesture is the ONLY
thing in the way. Prompting on a muted item trains viewers to click a button
that undoes an operator's decision.
Tizen gains enablejsapi + a postMessage bridge so a live toggle flips the embed
without reloading it — reloading would restart the video from zero every time
someone touched the control.
11 new tests pinning each precedence step separately; 1055 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Two gaps that both end the same way — a panel nobody can fix without a van.
OFFLINE. Content bytes were never persistently cached. The service worker
skipped /uploads/content/ and leaned on the browser's HTTP cache, which is
reasonable on a desktop and is not a documented-persistent store here:
BrightSign guarantees survival across reboots for IndexedDB, localStorage and
SQLite, and their own answer for offline video is to cache the bytes explicitly.
A panel could come back from a power cut with its playlist intact — that lives in
localStorage — and no media to play it with.
The reason content was skipped is real, and player-cache-policy.js is what makes
intercepting it safe. Seeking video issues range requests, and naive caching is
worse than none: storing a 206 as the whole file means every later full request
gets a fragment, and answering a range request with a 200 makes some media stacks
fail outright. So only complete 200s are stored, and ranges are served by slicing
the stored body into a correct 206. The content cache survives shell
re-versioning, or every deploy would re-download the playlist over a link that may
be exactly what is broken.
SELF-UPDATE. The package can replace autorun.brs, so a truncated file is a dark
panel with no app underneath. The safety is the ordering: download to .part,
verify sha256 AND size, then delete the .done marker, rename, reboot. Marker
first is not stylistic — leaving it makes the next boot skip the archive and the
update silently never happens. A failed extract parks the zip as .bad instead of
retrying every boot, which would be a loop indistinguishable from a hardware
fault. sha256 because that is what roMessageDigest can compute; a checksum the
player cannot verify is an unverifiable package.
The decision lives on the server and is unit-tested, and the host only executes
it — re-implementing the version comparison in BrightScript would put the
prerelease trap somewhere untestable. That trap is honoured directly: a player on
1.9.29-rc1 is running something semver-OLDER than 1.9.29, so an opted-in player
HOLDS a prerelease of its own core rather than being pulled off the build it was
given to test. Narrowly — a newer core still lands, so opting in never means
never updating again.
Both loop conditions are closed by construction. The manifest and the download
come from one buffer hashed once, so a checksum cannot describe bytes we are not
serving. And the version is stamped into autorun.brs at build time by both
builders, so the script reports the version it actually is — otherwise the player
applies the update, still reports the old version, and is offered the same
package forever.
Failure always degrades to "keep running the old version": an unreachable
manifest, a missing checksum, a failed verification, a full attempt counter and
an unbuildable package all resolve to skip.
998 tests pass (was 954).
st-sync.js wrapped SyncManager but nothing drove it. The player now does: the
leader opens a new sync session on each advance, and every member — the leader
included — binds the video with attachVideo() on a NEW id only.
The leader binds from its own broadcast rather than at announce() time on
purpose. Starting when it announces would put it ahead of its followers by the
width of the network, which is the one desync nobody would think to look for
because the leader always looks correct.
Item selection stays clock-derived under both backends. Native sync replaces
only the seek/nudge drift correction, because setSyncParams has the element hold
its own alignment and correcting it ourselves would fight the platform — every
frame we moved is one it then has to undo. Keeping selection on the shared clock
is also what keeps images and widgets, which have no setSyncParams, advancing
with the videos instead of drifting off alone.
LEADER RULE: reuse the existing election (resolveGroupLeader) rather than adding
a column. It already resolves pinned-if-online, else first online member on the
shared playlist, else first by id — deterministic, stable, and already what the
group-sync payload reports. A second mechanism could only disagree with it.
Added on top: a group whose elected leader is OFFLINE falls back to our
protocol. Ours is leaderless and carries on; native sync has exactly one
broadcaster, so those members would sit waiting for an announcement that never
comes, with the dashboard showing a healthy group throughout.
device_groups.sync_backend ('auto'|'screentinker'|'brightsign') is the operator's
REQUEST; the answer comes from the existing pure resolveSyncBackend() so the
players, the dashboard and the stored setting cannot disagree. The resolved
backend, reason and downgraded flag ride in the group_sync payload and in the
group API, and the dashboard shows the refusal reason instead of a setting that
quietly isn't in force. An unrecognised value is rejected rather than stored,
because the resolver reads anything unknown as 'auto' — a typo would otherwise
return 200 and run a different protocol than the UI displayed.
FIXED WHILE HERE: the player re-entered group sync only when the group ID
changed, with a comment noting the clock protocol has no leader role. Native
sync has one, and neither a protocol switch nor leadership moving alters the
group id — so a player promoted to leader kept behaving as a follower, nobody
announced, and the group sat unsynchronised. The re-enter key now includes the
backend and the leader flag.
971 pass (+17).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The web player sent battery/storage/RAM/CPU as nulls and 'Web Player' in the
wifi_ssid column, and the bs_model / bs_os_version / bs_serial / bs_screen fields
the player already reported at registration were consumed by nothing. A browser
tab genuinely has none of that. A BrightSign has some of it, and was reporting
none.
Telemetry comes from a CACHE the heartbeat reads synchronously. The beat builds
its payload every 15s without awaiting, but the one real sensor here —
deviceInfo.getTemperature() — returns a promise; awaiting inside the beat would
either block it or serialise a pending Promise into the payload, which is exactly
how device_id once became "[object Promise]". The cache starts EMPTY rather than
null-filled and is spread last, so off-platform nothing changes and a null here
can never clobber a value another player family legitimately supplied.
wifi_ssid was actively false on a PoE Ethernet appliance — an operator reading
that column was told an SSID that does not exist. It is null there now, and the
device view shows a real hardware block instead. Android's WiFi display is
untouched.
Hardware identity is a SEPARATE writer from applyDeviceInfo, deliberately. That
function is a blind full-row overwrite, and an empty device_info once nulled
seventeen columns every five minutes because {} is truthy. These fields arrive
only on a full register, so the same shape would wipe them on every lightweight
refresh in between; COALESCE makes "no news" mean "unchanged".
The OS build gets its own column rather than reusing android_version, which is
load-bearing as a TYPE discriminator: device-detail chooses between the Android
and browser layouts with android_version.startsWith('Web/'), so writing
"BrightSign OS 9.0.189" there would have rendered a BrightSign with battery and
WiFi cards — and applyDeviceInfo would have clobbered it on the next refresh.
Storage is labelled "Player Storage", not "Storage": on this family the number is
the widget's cache quota, not the device filesystem, and it lands in the same
column as Android's real disk figures.
Schema: device_telemetry.temperature_c REAL; devices.hardware_model,
hardware_serial, hardware_os_version, output_index. All nullable, all idempotent
in the existing migration array.
973 pass (+19). The temperature tests drive a real socket into a real server,
because changing the arity of the telemetry INSERT would break every player's
heartbeat, not just BrightSign's.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
A BrightSign emitted BLANK screenshots and logged "Screenshot sent". With hwz
enabled the video decodes onto a hardware plane outside the browser compositor
— BrightSign's docs say the HTML/JS layer "doesn't see the pixels" — so
drawImage(video) produces a fully TRANSPARENT image and throws nothing.
Chromium 87, which this XT245 reports, fails the same way.
Both capture paths set captured/drawn = true purely because drawMediaFit() had
not thrown. So the dashboard showed a dead screen while the panel played
perfectly, and the zone path painted a black rectangle in place of the labelled
placeholder drawZonePlaceholder() exists to guarantee ("never a transparent
hole"). Success reported, nothing done.
isMediaReadable() does not catch this. It answers "am I ALLOWED to read this"
(same-origin / CORS), which is a different question from "did any pixels
arrive".
videoFrameIsCapturable() probes a 16x16 scratch canvas before committing to a
full-size draw. ALPHA is the discriminator, not colour: a scratch canvas starts
transparent and a real decoded frame writes alpha=255 even when the frame is
pure black, so a legitimate fade-to-black still reads as captured while
"nothing arrived" does not. A tainted canvas counts as captured, because
tainting only happens once cross-origin pixels have actually been drawn.
Probing BEFORE the draw matters twice: it avoids a wasted full-size drawImage on
every frame of a 1fps stream, and in the zone path it stops a black rectangle
being painted underneath the placeholder.
When a video is on screen but unreadable the status card now says so, because
that card is also what shows for "no content" — without the line an operator
would reasonably conclude the screen was blank.
Not gated on BrightSign: the same silent failure exists for any stalled decoder
or engine that declines to hand back frames.
10 tests, 964 pass.
Blanking the screen took three attempts on real hardware, and each failure was
the same lesson from a different angle:
1. black overlay -> the video played straight THROUGH it. With hwz
enabled the widget decodes onto a hardware plane and
the graphics plane sits behind it; z-index is
irrelevant across planes.
2. pause + hide element -> playback stopped and the LAST DECODED FRAME stayed
on screen. Hiding a DOM element does nothing to the
plane, which is not part of the DOM.
3. pause + remove src -> releases the plane. Black.
+ load()
Coming back re-mounts through nextItem(), because a torn-down element cannot be
resurrected. The playlist keeps advancing while the screen is off, so each newly
started item is torn down as well — caught on 'play' in the capture phase, or the
next video lights the panel back up a few seconds later.
CEC is now explicitly not load-bearing. Our XT245 logs "failed to get cec clock"
and does not respond to it at all, which is precisely why blanking cannot depend
on a cooperative display: plenty ignore broadcast CEC or need direct addressing.
displayPower() stays as opportunistic best-effort alongside the teardown.
Verified on hardware: not black, then frozen frame, then black.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The web player handles four of the ~20 fleet commands, because a browser tab
genuinely cannot do more. A BrightSign can, and was inheriting the browser's
limits for no reason.
screen_on/screen_off now send CEC Image View On (0x0D) / Standby (0x36) so the
display actually sleeps. The overlay only painted the screen black: the panel
stayed lit, drawing power and at risk of burn-in. Best effort by design — some
displays ignore broadcast CEC and need direct addressing — so displayPower()
returns false when unavailable and the overlay is applied either way, meaning
something visible always happens.
reboot was silently ignored: the dashboard button did nothing on a web player.
It now goes through the host to RebootSystem, and still logs a clear "not
supported" off-platform rather than failing quietly.
set_volume applies to whatever is playing AND is re-applied on every subsequent
'play' event, caught in the capture phase because media events do not bubble.
Media elements are created per item across fullscreen, zone and preload paths,
so setting volume once would otherwise last only until the playlist advanced.
Wall followers stay silent throughout — that is deliberate, not an oversight.
A dual-output player addresses HDMI-N for the screen it actually paints, so
output 2 sleeps its own display rather than output 1's.
954 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The bridge stored device_id in the registry and the display still came back as a
NEW device on the next boot. The id is not an identity on its own: the server
authenticates a claim to an existing display with the token, so an id presented
without one reads as a brand-new player and gets a fresh row.
device_token now sits alongside device_id in the registry, getConfig adopts both,
and clearIdentity forgets both — a stale token must not outlive the identity it
belongs to.
Found on an XT245, not in a test, which is why the three new cases name the
symptom rather than the mechanism. 951 pass.
Also worth recording from the same session: the duplicate rows had a second
cause. The widget's storage_path was pointing nowhere useful, so localStorage
had no persistent home and the per-install fingerprint salt was regenerated on
every boot. With storage_path set correctly the cache directory now exists on
the player and the fingerprint is stable, which is what stopped the churn; the
registry identity is the belt to that pair of braces.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
st-sync.js wraps SyncManager, the native protocol. Three properties drove the
shape of it. It repeats the sync broadcast at 1Hz so a player powered on late
still joins, which means acting on every repeat would reload the video once a
second forever — on screen that reads as a stutter, not as a sync fault, so the
id dedupe is mandatory rather than an optimisation. The leader starts from its
OWN broadcast rather than at announce() time, or it runs ahead of the group by
the width of the network. And attachVideo refuses an element with no
setSyncParams instead of half-syncing it.
offline.html is the local fallback the host falls back to after three failed
loads. It names the server, keeps probing with capped backoff so a site full of
panels cannot storm a server that is coming back, and asks the HOST to restart
the player when it answers — never navigating itself, for the same reason the
player never reloads itself here.
The resolver now models multicast reach. All-BrightSign groups spread across
subnets no longer get native sync: each subnet would sync neatly within itself
while drifting from the others, and the dashboard would show a healthy group
throughout. The IP comparison is a heuristic so it is used in one direction
only — differing networks are evidence against, matching ones are never proof
for, and unknown addresses block nothing.
st-sync.js is served from its single source like the bridge, and the SD card
deliberately carries neither: the player pulls both from the server so a stale
copy on a card can never skew from the player using it.
948 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Reviewed autorun.brs and st-bridge.js line-by-line against the real examples
instead of the prose docs. Five defects, three of which would have been silent.
The registry API is asynchronous and section-oriented: read(section, key)
returns a Promise and writes take an object, write(section, {k: v}). The bridge
treated both as synchronous, so deviceId() returned a Promise object — truthy
and non-empty — and a panel would have registered as "[object Promise]" while
its real row sat unclaimed. It now prefetches into a cache behind onReady(), and
connect() waits for that before registering.
brightsign_js_objects_enabled: true is required alongside nodejs_enabled for
require("@brightsign/*"). Without it the bridge degrades to no-ops and the
player loses identity and restart delegation — which would have read as
"BrightSign doesn't work" rather than as one missing flag.
storage_path is a directory name, not a volume, and storage_quota is a string;
the local fallback URL needs its volume (file:/SD:/offline.html). Added
security_params and hwz_default to match the examples.
SyncManager does not work unless networking/ptp_domain is "0", which needs a
reboot to apply. Done only when this player is configured for native sync, and
read-before-write so it reboots once rather than on every boot.
Confirmed correct as written: messageport, the roHtmlWidgetEvent loop, and
RebootSystem(). The notes also state a widget URL may be an externally hosted
page with the same JS API access — the favourable answer to the question the
original probe was built to ask.
Bridge tests now model the async section-oriented registry, so a synchronous
stand-in can never hide this class of bug again. 931 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The bridge and the host existed but nothing loaded them. Now the player does.
restartPlayer() replaces every location.reload() call site. On BrightSign a
page-initiated reload does not reliably bring the roHtmlWidget back, so the page
asks the host to rebuild it and only falls back to reload() when no host is
there to take the request. That covers the deploy path, the operator refresh,
the service-worker activation and the manual reset.
Identity now round-trips through the registry, which outlives localStorage on
this platform: getConfig() adopts a registry identity when local storage comes
back empty, instead of re-pairing and spawning a second row for a panel that is
already provisioned. The operator reset clears the registry too — otherwise it
would clear localStorage, get the same identity straight back on the next boot,
and reset nothing.
Registration reports platform 'brightsign' rather than "Chrome 120", which is
what sync-backend.js resolves native-vs-ours from, plus model, OS, serial and
which output this widget paints.
Dual output needed a collision fix: autorun.brs gives the second HDMI output its
own widget, and both widgets share an origin, a registry and one SD
storage_path. Un-namespaced, output 2 would read output 1's config, install salt
and device id and the two would collapse into a single device row. Storage keys
and registry keys are now suffixed per output; screen 1 keeps the bare names so
nothing existing moves.
The bridge is served from its single source so the copy the player loads can
never skew from the one on the SD card next to autorun.brs, and it is served to
every player rather than gated on a user agent — a panel reporting an unexpected
UA would otherwise silently lose restart-instead-of-reload.
Two test harnesses extract player functions and run them in an isolated scope,
so they now supply SCREEN_SUFFIX; one gained a case proving two outputs of one
player get distinct identities. 927 pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Give every item on a sync-group playlist a daypart — "menu boards 06:00-22:00" — and at 22:00 the
whole group kept displaying, or looping, whatever had been in-window last. An identical ungrouped
screen showed "Nothing scheduled right now" correctly.
The group schedule tick filters items by the same scheduleAllows check as solo playback. With
everything filtered out the period is zero, so the target is null and the tick simply returned.
Nothing else was watching: group members are schedule-driven, so renderContent arms no advanceTimer,
and a group-rendered video is created with loop = !!groupSync. Solo playback routes this exact
condition into the idle card; group playback had no equivalent, on either player.
Both ticks now tear down and show the idle card when the schedule has nothing live, and pick up
again when the daypart re-opens.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Taking a display out of a sync group, or deleting the wall it belonged to, froze it on whatever was
playing. The clip looped forever and every later refresh took the "unchanged" branch, because the
element was attached, playing and un-errored — healthy by every check the player makes. Only a
reboot cleared it.
On the web player, reconcileAdvanceTimerForMode re-arms a solo timer for widgets and images but
skips video and YouTube, on the grounds that they "self-advance via their own end handlers". The
handler that is live at that moment, though, was built for the mode being left: a group-rendered
video was created with `loop = !!groupSync`, a wall-follower video with `isFollower` true, and both
are captured in the closure at render time. A looping element never fires `ended`, and a follower's
handler declines to advance — so nothing self-advances and nothing re-renders. It now re-renders
whenever the element on screen is still looping, rather than guessing which media types can look
after themselves.
Tizen had the same freeze by a different route. GroupSyncController.exit and WallController.exit
both call player.invalidate() for exactly this purpose, but invalidate only cleared the change
signature — and load() returns at the continuity check ("current item survives, just retarget the
index") before reaching any render, so the invalidate was a no-op. It now forces the next load to
re-render, which is what those call sites always intended. On Tizen this froze every item type, not
just video, because `single` skips the timer in all of the renderers.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Replacing the single item of a one-item playlist did nothing. The old promo, board or clip kept
playing while the dashboard showed the new playlist published and the device perfectly healthy —
only a reboot or a manual refresh cleared it.
#157 defers a rotation so a live item is not yanked mid-play, and applies it "on the next natural
advance". For a one-item playlist there is no such thing, by design: single-item rendering
deliberately never advances. A video gets `loop = (playlist.length === 1)` and so never fires
`ended`; a YouTube embed loops for the same reason and skips its safety net; a solo widget is "held"
on a self-re-arming refresh that never calls nextItem, because reloading it would reset a directory
board's scroll. Tizen is worse still — `single` makes every renderer skip its timer, so images
freeze too.
Two guards, the same pair already applied to the Android controller:
- A one-item playlist is never deferred. There is nothing to protect from being cut off, since
nothing was going to advance anyway.
- Any deferral that does happen gets a 60-second deadline. The deferral is a bet that an advance is
coming; if the bet loses, the change must still land rather than strand the screen on content the
operator has already replaced.
Verified in headless Chrome: a one-item playlist holding a solo widget (the "held" case that never
advances), its only item replaced with a different widget — the screen followed, with no reload and
no restart. Before the change it stayed on the replaced item indefinitely.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
In a multi-zone layout a zone's video advanced only on `ended`. On the web there was no error
handler and — alone among the zone branches, which all arm a timer — no timer either. On Android the
zone player listened for STATE_ENDED with no error listener and no fallback.
A playback error lands in STATE_IDLE, never STATE_ENDED, so nothing advanced. A 404, an unreachable
remote_url, a clip the device cannot decode, or content not yet cached while the device is offline
(the zone then falls back to the server URL, which fails with no network) all had the same result:
that region of the screen went black and stayed black for days, while every other zone kept rotating
normally. It reads as a rendering bug rather than a bad file, and nothing self-heals — the layout has
to change or the app has to restart.
Both fixes already existed elsewhere and were simply not carried across. MediaPlayerManager treats a
playback error as a completion for exactly this reason ("Root-2: a corrupt/undecodable video used to
freeze the playlist forever"), the fullscreen web path has both an onerror and a timer, and Tizen's
ZoneRenderer has an onerror plus a duration+5s safety net. The multi-zone paths were the gap.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The suspended branch replaces the whole status overlay with its own markup, and that markup does not
contain #statusText. showStatus then did:
document.getElementById('statusText').textContent = msg;
so every later call threw a TypeError for the life of the page. The consequences got worse the
further down they went:
- Each refresh beat re-emits device:paired, whose handler calls showStatus('Waiting for content...')
— so the player raised an uncaught error and sent itself a "crashed" exit beacon every few minutes
while suspended. This is very likely the "Cannot set properties of null (setting 'textContent')"
the comment near the exit-signal contract says could never be traced.
- showNothingScheduled() calls showStatus BEFORE arming its 30-second re-check. So once the account
was restored, a playlist whose dayparts had all closed left the screen on the stale orange
"Account Suspended / Please upgrade your plan" card with no retry timer at all — it never
re-checked the schedule and never recovered without a reload.
showStatus now rebuilds the element if it is missing rather than bailing, so the message the caller
asked for is actually displayed and the recovery path continues.
Verified in headless Chrome against the real player: destroy the overlay exactly as the suspended
branch does, then call showStatus — no throw, no uncaught page error, and "Waiting for content..."
on screen.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Editing a layout did nothing on a web screen that was already showing one. Add a zone, move an item
between zones, resize a zone, switch layouts, clear the layout — all silent, for as long as the item
list itself stayed the same.
Two reasons, and both had to be fixed:
- The change fingerprint covered item identity, order, revision, schedules and transition, but not
zone_id — so moving an item from one zone to another produced a byte-identical fingerprint
(published_snapshot is ordered by sort_order, so the order did not move either).
- The layout is not part of the item list at all, so a change to it could never appear in an
item-derived fingerprint. `layout` was assigned and then the function returned "Playlist
unchanged", and in multi-zone mode nothing else re-renders: each zone runs its own timers and
renderContent is never called again. The no-change health check does not help either, because the
old zone divs still hold media so the surface looks attached.
zone_id now sits in the item fingerprint, and the layout gets its own signature covering the layout
id and every zone's geometry, stacking, type and fit. Tizen's ZoneRenderer has always compared a
zone signature — this is the web equivalent, and it is the same defect that was fixed on Android
this week.
Verified in headless Chrome against the real player: a third zone added IN PLACE (same layout id,
same item list, no reload, no restart) re-rendered the screen to three zones. Before the change that
update was discarded as unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The signature fix was necessary but not sufficient, and only a browser showed it. The update arrived
and was applied — the console logged "Playlist changed, updating" and playlist[0].widget_rev held the
NEW revision — but the iframe on screen still carried the old one.
Two guards were swallowing it. Continuity keeps a surviving item playing and deliberately does not
re-render ("Just retarget the index pointer - no re-render, no interrupt"), and identity is
content/widget ID, which does not change when a widget is EDITED. So the edited widget counted as
surviving. And the fallback that would eventually notice does not apply either: a solo widget is
deliberately never re-rendered on a timer, because that would reset a directory board's scroll.
Between them the new revision sat in the playlist, unused, indefinitely.
Now a surviving WIDGET whose rev changed is re-rendered through the buffered swap — which builds the
new iframe hidden and reveals it on load, so it is flash-free by design and this costs nothing
visually. Non-widget items and unedited widgets are untouched, so the continuity behaviour that
guard exists for is intact.
Verified in headless Chrome driving the real player: paired, widget assigned, then edited with no
page reload and no restart. rev 1785460578 -> 1785460589 on the live iframe.
Also caught here: my first attempt called renderItem(), which does not exist — the console.log fired
and the exception ate the rest of the handler, which looked exactly like the fix not working. The
function is renderContent(item).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Same fault as Android, in both other players, and my earlier read of them was wrong: I assumed they
rebuilt the iframe each cycle so could not go stale. They do rebuild — but only after the update
survives a change check, and both change checks key on IDENTITY:
web content_id|widget_id|remote_url|filepath|filename|schedules|transition
tizen [content_id, widget_id, remote_url, mime_type, schedules, transition]
A widget's identity does not change when it is edited, so an edit produced an identical signature,
the update was discarded as "unchanged", and the old render stayed up. widget_rev now sits in both,
alongside schedules and transition, which are there for exactly this reason.
The render URL carries the rev on both players as well. In the zone path the web player was picking
up `item.widget_rev` inside a loop whose variable is `a` — that would have been undefined on every
zone; it now reads the zone assignment's own rev.
Caching, which is the reason this is worth doing properly rather than just busting the URL: a URL
carrying ?rev=<updated_at> is content-addressed, so those bytes cannot change without the URL
changing. The render endpoint now returns immutable caching for a pinned URL and keeps no-store for
a bare one, and the service worker serves pinned renders cache-first (CACHE_NAME v18).
That closes a real gap. no-store meant widgets were the ONE thing the player's offline cache could
never hold, so a display that lost its uplink lost its widgets — while its images and video kept
playing. Offline resilience is the point of that cache. Old players sending no rev are unaffected:
they still get no-store, because without a rev nothing distinguishes one render from the next.
Verified live: bare URL -> no-store; ?rev=123 -> public, max-age=31536000, immutable. 859 server
tests green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
A widget playlist item carries its id in widget_id and has no content_id at
all. The player sent only content_id, so a widget play arrived with nothing
identifiable and was written with both columns null — and play_end bound
content_id to BOTH columns, so that row could never match itself and was never
closed or given a duration.
Nothing looked broken: a row existed for every play. It just named neither what
had played nor which widget, and never ended. Reports read empty for any screen
showing a widget, which is most of the interesting ones. Seen on a live screen
playing a single widget: one open row, both columns null.
The player now sends widget_id alongside content_id, and a name falling back
through the fields a widget item actually has, so the event records what played
even when neither id resolves. The server prefers an explicit widget_id and
keeps the old content_id sniff as the fallback for players that predate this,
so an older client that puts a widget id in content_id still attributes
correctly.
Found by reading a real screen's proof-of-play rather than the code. The first
attempt at the fix broke the statement outright — the explanatory comment was
placed inside the SQL template literal, where a JS comment becomes SQL, and the
server logged `near "/": syntax error` on every play_end. Comments now sit
above db.prepare(), with a note saying why.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
socket.io does not retry every disconnect. On 'io server disconnect' it stands
down deliberately and waits to be told to reconnect. The player assumed the
opposite in two places: the disconnect handler stopped the watchdog because
"socket.io owns the reconnect once it KNOWS it's down", and verifyLivenessSoon
skipped a present-but-disconnected socket for the same stated reason.
So when the server closed a socket — a handler throwing, a deploy, an eviction
— nothing was left watching and the player stayed down until someone reloaded
the page. That is what it does on a wall: nothing, indefinitely, with no error
on screen. It happened to a live panel whose heartbeat hit a constraint error;
the server dropped the socket and the display sat dark until reloaded by hand.
A supervisor now backs up every disconnect the client did not itself initiate.
It re-establishes only a socket that is genuinely not connected, and only after
a grace longer than socket.io's maximum backoff, so the reconnection socket.io
does own is never raced. Our own teardown is excluded, since connect() closes
the previous socket before opening the next and supervising that would fight
the attempt already in flight. A resume now hands a stranded socket to the
supervisor rather than assuming someone else has it.
The decisions are pure functions alongside the existing watchdogShouldReconnect,
so they are testable without a browser, and a test asserts the grace still
exceeds the configured backoff ceiling if either is ever retuned.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
A display panel has no keyboard, no pointer and usually no way to clear site
data, but the URL it loads is configurable from whatever manages it. Loading
the player with ?reset=<token> now discards this install's identity so the
panel returns as a new device with a fresh pairing code — the recovery path
when a panel is holding an identity that belongs to a different screen, and the
ordinary path when redeploying a panel to another site.
It applies once per token, which is the whole design. A configured URL is
permanent; nobody goes back and removes the parameter. A reset that fired on
every load would drop the pairing on every reboot and present as a screen that
cannot hold its pairing at all — which reads as an intermittent server fault
rather than the URL doing exactly what it was told. The applied token is
remembered, so ?reset=1 left in place forever resets exactly once; any other
value resets again.
The server URL is deliberately kept, since clearing it would strand a panel
that cannot be typed into, and the cached playlist and layout are dropped so
the new device does not come up showing the previous screen's content.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The web player derived its fingerprint entirely from hardware traits: user
agent, screen geometry, colour depth, timezone, core count, platform and a
canvas raster. Every one of those describes a model rather than a unit, so two
identical panels produced the same value and the server, which matches on that
value globally, treated them as one device. Two UniFi Pro Displays at different
sites both produced web-m73u8w-5f; the second could not be brought online, and
the row ended up shared, each display evicting the other every thirty seconds.
The identity a player presents is now hardware plus a random per-install salt
kept in localStorage, so two identical panels differ from their first
connection. This is what the Tizen player has always done; the web player is
brought in line with it rather than given a new scheme.
The hardware value is still sent, but only as a hint, and only to move a caller
that has ALREADY authenticated with a device id and token onto its own row —
which is how an existing player carries its identity across this change. A
caller without credentials never resolves through it, however few rows it
appears to match: one row recorded does not mean one display exists, and that
distinction is the whole bug. Such a caller is provisioned a new device, which
costs one pairing code and cannot be wrong.
Older clients are unaffected. They send no hardware value, so they take the
exact-match path exactly as before, and both keep working: the APK's
fingerprint already includes ANDROID_ID and the Tizen player's is already a
stored random id, so neither ever shared an identity between units.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
Three players died with "Cannot set properties of null (setting 'textContent')"
and it could not be traced. The message names no file, and every candidate line
in the current player was ruled out by inspection: the unguarded writes all
build their element with createElement, every getElementById target exists in
the markup, and the script runs after the markup. That points at an older
cached build still served by the service worker, which is exactly the case
where reading current source proves nothing.
The ErrorEvent already carried filename, lineno and colno. They were being
discarded. Keeping them makes the next occurrence name its own line.
Composed to fit the 200 characters the server stores, so the location is not
truncated away: message plus one location, basename only since the origin is
already known from the device. A promise rejection has no filename, so it falls
back to the first stack frame. A cross-origin script, which reports a bare
"Script error." with nothing else, says so rather than emitting :0:0 as if that
were an answer.
A resource load failure still is not a crash; a test guards that, since this
touched the handler that decides it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
A display panel usually has no keyboard and no pointer, so a recovery path that
waits for input is not a recovery path. When the server stopped recognising a
device, the player revealed the server-URL form — typing that cannot happen on a
screen-only panel — and hid the pairing section, which was the one thing that
would have rescued it. The screen then sat on "Device was removed from server"
until someone physically reloaded it, even though the player was still connected
to the right server and could have asked for a new code itself.
Both handlers now drop the stale credentials and reconnect on a short countdown.
Reconnecting re-registers with no device_id, so the server issues a fresh pairing
code and the existing registered handler puts it on screen. config.serverUrl is
known-good by construction — we are talking to that server at the moment we are
rejected — so there is nothing for a human to re-enter.
The URL field stays editable throughout, and typing cancels the countdown, so
someone who does have a remote and wants to repoint the player is not yanked
mid-edit. The countdown is the same helper the first-boot path already used,
lifted out and shared rather than duplicated; its input listener is bound once
at setup instead of per countdown, which would have stacked a listener each time.
The Android player already behaved this way (ProvisioningActivity repair mode);
this brings the web player in line.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Uaeo9MvzKoyXuN6ZsbhtkL
The webpage-widget preview note claimed: "the site blocks embedding in a browser
— it will still display on the device screen." The second half is false. The
widget renders the URL in an <iframe> (renderWebpage), and the device player
loads that page in a Chromium WebView, so a site sending X-Frame-Options /
CSP frame-ancestors (Amazon, Google, most large sites/banks) is refused on the
device exactly as in the browser preview. The note set the wrong expectation —
a customer (and we) chased CORS and "should work on device" when the live
device screen was blank too.
Reword to tell the truth in all 6 languages (en/es/fr/de/it/pt), both the
frontend i18n key (widget.webpage_blocked_note) and the player's
preview_webpage_blocked string: if the preview is blank the site blocks
embedding and won't display on the device either — try a page that allows it.
Copy-only; no behaviour change. This is not an Amazon-side fix (embedding refusal
is the site's choice) — just accurate messaging.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Subtitles/captions are set once in the content library and applied
automatically by the player — no in-player controls (the player stays bare).
- DB: 4 new content columns (captions_enabled, captions_lang for YouTube;
subtitle_url, subtitle_lang for uploaded videos), all default off/NULL.
- buildSnapshotItems: denormalize the 4 fields into published_snapshot so the
player receives them (enumerated query).
- content.js PUT: accept the 4 fields (subtitle_url only clearable here).
- POST /:id/subtitle: dedicated .vtt uploader (separate multer, since the main
filter is video/image-only); stores the file in the content dir, records
subtitle_url + subtitle_lang. Old subtitle file replaced; DELETE cleans up
the sidecar.
- Player: YouTube -> loadModule('captions') + setOption(...languageCode) in
onReady (best-effort, wrapped). Uploaded video -> a <track kind="subtitles">
appended to the <video>, forced mode='showing' on load (same-origin, so
CORS-clean like the video).
- Edit modal: YouTube gets an enable-captions checkbox + language; uploaded
video gets a .vtt file picker + language + a remove-subtitle option. en/es.
Honest limitation (in the PR): YouTube caption control via the IFrame API is
undocumented/version-dependent and only works if the video actually has
captions — hence best-effort and wrapped so it can never break playback.
Test: content-subtitles.test.js — the 4 fields survive publish -> snapshot,
the .vtt upload endpoint stores + records the file, and a non-.vtt is rejected.
Suite 550/550.
Closes#216
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On Android TV with weak/unstable WiFi, YouTube embeds auto-select 1080p+
and buffer/stall. Add a per-item "Unstable connection" flag that biases the
YouTube embed toward a 720p ceiling.
- DB: content.unstable_connection INTEGER NOT NULL DEFAULT 0 (non-destructive,
existing rows unchanged).
- buildSnapshotItems: denormalize the flag into published_snapshot so it
reaches the player (that query enumerates columns, so it had to be added
explicitly — covered by a new test). preview-payload reuses the same query.
- content.js PUT: accept + coerce unstable_connection to 0/1.
- Player: playerVars.vq='hd720' + best-effort setPlaybackQuality('hd720') in
onReady when the flag is set. Both are hints YouTube may still override, but
together they bias the initial selection down to 720p.
- Edit modal: YouTube-only checkbox + hint; en/es i18n.
Scoped to the core ask; the issue's optional "Shorts get inverse hd1080"
refinement is intentionally left out (dubious for signage, and forcing higher
quality on a weak link is the opposite of the goal).
Closes#217
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
YouTube Shorts never fire the ENDED state via the IFrame API, and some
Android TV WebViews drop ENDED even for regular videos. The player advanced
solely on onStateChange ENDED, so a missing event stalled the playlist
indefinitely.
Arm a duration-based fallback timer in onReady (getDuration + 3s slack) that
calls nextItem() if ENDED never arrives. It is cleared on a real ENDED, on
onError, when a newer player is created, and in teardownCurrentMedia so a
stale timer can't force a spurious advance after rotation. Skipped when
looping (single-item playlists) and when duration is 0 (live streams).
The Tizen player is not affected: it embeds YouTube as a plain iframe and
already advances multi-item playlists on a duration timer rather than the
YT JS API, so it never waits for ENDED.
Closes#215
Refs #184
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The cold-start cached-playlist restore runs at top-level during initial
script execution: it calls startPlaybackAt(0) -> playCurrentItem ->
renderContent, whose first statement is `renderSeq++`. But renderSeq was
declared with `let` next to the buffered-video code far below, so it was
still in the temporal dead zone on that early path:
ReferenceError: can't access lexical declaration 'renderSeq' before
initialization (renderContent -> playCurrentItem -> startPlaybackAt)
Result: any paired device with a cached playlist + known layout threw on
cold load and rendered nothing. Regression from the warm-play/buffered
render work, which made renderContent touch renderSeq at its very top.
Fix: declare `let renderSeq = 0` with the other top-level player state so
it is initialized before the restore path can call renderContent. No
behavior change to the buffered-render logic.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reconcile advanceTimer on mode enter/exit via reconcileAdvanceTimerForMode in applyWallMode/applyGroupSync — fixes the group-entry zombie timer and the solo-exit frozen image. Closes#200.
Pre-release review follow-up to #204: fixes the Android superseded-wipe playlist wedge + GL leak, and adds the stale-item guard to web/Tizen renderVideoBuffered.
Compositor panel-ring board scroll (smooth on Blink+Gecko, no blank-on-refresh), a per-device frame-rate diagnostic widget + dashboard card, and web/Android/Tizen device-id passthrough to widget render URLs.
* fix(web-player): buffered widget swap + solo-board hold to end directory-board black flicker
A fullscreen widget (e.g. a solo directory board) re-rendered on the advance timer:
renderContent tore the container down to black (innerHTML='') BEFORE the replacement
iframe finished loading, and a single/only-active widget re-advanced to itself every
duration_sec — so the board cycled black every few seconds. That reload was ALSO the
only thing refreshing the board's static, server-rendered data, so simply holding it
in place would freeze the data.
- Buffered swap: build the new widget iframe hidden OVER the current content and reveal
it on 'load', then tear down the outgoing content — no black frame on any widget
transition. On a load timeout, keep the last-good board and discard the dead hidden
frame via a shared cleanup path (don't reveal a blank frame); a transient server blip
self-heals on the next refresh.
- Solo/held widget (nextActiveIndex === currentIndex): hold in place and refresh its
DATA on a decoupled interval (WIDGET_SOLO_REFRESH_MS = 60s) via the buffered swap,
instead of re-querying the DB + re-rendering full HTML every duration_sec, fleet-wide.
Scoped to non-wall fullscreen widgets; wall+widget keeps the legacy path.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix(web-player): route held directory-board refresh through nextItem (schedule-aware)
Follow-up to the buffered widget swap: the solo/held board refreshed via a bespoke
self-rescheduling loop that never re-evaluated the schedule — so a board could outlive
its daypart, and a newly-active sibling item was never picked up (the player stuck on
the board). Delete the duplicate loop entirely and advance via nextItem in both the
held (WIDGET_SOLO_REFRESH_MS cadence) and rotating (duration) cases: nextItem
re-evaluates the schedule every cycle and re-renders the held board through the buffered
swap (still no flash), and drops the duplicate code path that caused the bug.
Verified: the timer-lifecycle harness (6 scenarios / 68 assertions) still passes,
including widget->video transition and the leak/timer-count checks.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A fresh unclaimed player that reconnects (same fingerprint) INSIDE the server's
~5s deferred-offline grace hit a false 'active on another connection' reclaim
reject, then collided on UNIQUE(devices.pairing_code) on the fall-through INSERT
and wedged unclaimed with no content. Real trial customer (web player) hit it.
server/ws/deviceSocket.js:
- Fix A (guard): gate the liveConn reclaim reject on !inDeferredOffline
(pendingOfflines.has(id)). A device mid-deferred-offline is a zombie, not live,
so a same-fingerprint reconnect is a legit reconnect, not a hijack. A genuinely
live socket (never disconnected -> no pending-offline) still rejects a cloned
fingerprint -> anti-hijack boundary preserved (documented).
- Fix B (idempotency): when the unclaimed old row holds the SAME pairing_code the
reconnecting player presents, ADOPT/refresh it (mirror the claimed-reclaim path,
but no device:paired) instead of INSERT-colliding. Differing-code case unchanged.
- deferOffline is NOT shrunk (it exists to prevent transient-blip flapping).
server/player/index.html:
- The cold-boot flap source: an unfiltered pageshow handler ran verifyLivenessSoon()
on every load, opening+registering a socket early, which the boot connect() then
tore down and rebuilt (connect->register->disconnect->reconnect). Guard it with
ev.persisted (mirror the pagehide guard) so only real bfcache restores trigger it.
server/test/pairing-race.test.js:
- Forces the race against the real socket server (log-gated reconnect inside the
deferred-offline window), asserts no false reject / no UNIQUE collision / single
claimable row; + a hijack case asserting a cloned fingerprint on a genuinely-live
display is still rejected. Web- and android-shaped fingerprints. Fails 2/4 on
pre-fix code, 4/4 with the fix.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
